DMC DeLorean

The DMC DeLorean is a rear-engine two-passenger sports car manufactured and marketed by John DeLorean’s DeLorean Motor Company for the American market from 1981 until 1983-ultimately the only car brought to market by the fledgling company.

The DeLorean is sometimes referred to by its internal DMC pre-production designation, DMC-12.

An estimated 6,500 DeLoreans are still on the road. When details surrounding the DeLorean were first announced in the mid-1970s, there were numerous plans and rumors that the DeLorean would have many advanced features, such as elastic reservoir moulding, a unit construction plastic chassis, a mid-engine layout, an airbag, 10-mph bumpers and ultrawide Pirelli P7 tires; none of these would materialize in the production vehicle.

Bruce McWilliams, VP of Marketing for DMC and later acting President for DMC America, after resigning his position said, “The car could never be sold in the numbers John DeLorean predicted”.

In March 1975, DMC entered into a contract with Italdesign to have Giorgetto Giugiaro design the DeLorean sports car.

There had been interest in turbocharging the DeLorean early on, but the DMC engineering staff was busy with other projects, so DMC decided to go outside to develop a turbocharged version.

Six DeLorean cars were used during the production, along with one manufactured out of fiberglass for scenes where a full-size DeLorean was needed to “Fly” on-screen.

DeLorean Motor Company Teases Reveal Date And Sleek Image Of Its Gull-Winged EV

DeLorean Motor Company, the short-lived 1980s automaker behind the DMC DeLorean sports car turned pop culture staple thanks to the Back to the Future franchise, is returning with an EV model.

The DeLorean EV concept has just recently been teased, but its official reveal has now been moved up three days alongside an enticing teaser image.

DeLorean Motor Company is an American automaker founded in 1975 by John DeLorean.

With a redesigned logo and a new slogan, “The future was never promised,” DeLorean has seemingly reemerged from the bowels of nostalgia and obscurity and will be reborn as an EV brand.

The DeLorean EV will be on display on the Concept Lawn at Pebble Beach on August 21, as originally planned.

DeLorean Motor Company also stated that it will share the official name of the EV during the reveal.

The press release refers to the DeLorean EV as both a prototype and a concept, so if a production version does eventually arrive, it is sure to change.

DMC Shares Sneak Peek At DeLorean EV, Reveal Set For August 2022

DMC has announced that it will finally lift the veil on the DeLorean EV on August 18.

A teaser animation on the official DeLorean page can confirm that the vehicle will retain gull-wing doors.

DELOREAN ANNOUNCES NEW REVEAL DATE WITH TEASER IMAGE. DeLorean Motor Company has announced a new reveal date and released its first sneak peak of their electric vehicle.

Although the new EV will still be displayed on the Concept Lawn at Pebble Beach on August 21, 2022, the long-awaited DeLorean reveal will come three days sooner.

“Excitement is rising like the doors of our iconic sports car, and we are revealing the next generation prototype 3 days earlier than planned on the most prestigious stage at Pebble beach” said Troy Beetz, CMO of DeLorean Motor Company Inc. The past, present, and future of DeLorean will unfold over the duration of Monterey Car Week through a series of activations and events showcasing the vehicle.

Along with the reveal, DeLorean will also announce the official name of the vehicle.

As DeLorean prepares to take the stage in August, they released a pixelated teaser of the first official image of the EV on Friday.

DeLorean Shows First Image Of New Electrified EVolved Ahead Of Aug 18 Debut

Update 4/4/2022: DeLorean has shifted into high teasing gear dropping the first visible – albeit cropped and likely digital – image of the upcoming EVolved electric sports car that draws inspiration from the original gullwing model that gained its fame in the Back To The Future trilogy.

The new model, referred to as the DeLorean EVolved, features gullwing doors and looks like a modern version of the iconic DMC-12 from the early ’80s. As suggested by the hashtags, the new DeLorean will be fully electric and more focused on luxury.

It will be designed by Italdesign, and built by the DeLorean Motor Company that is owned by Liverpool-born engineer Stephen Wynne with headquarters in Humble, Texas.

Co/K9n8D1s5uK#DeloreanEVolved#Delorean#Auto#ElectricVehicle#Luxury#BigGame pic.

It comes a year after Italdesign’s own teaser for a modern-day DeLorean, although this one had the DMC moniker at the front.

Italdesign’s involvement with the project is fitting to the car’s heritage since the original DMC-12 was designed by Giorgetto Giugiaro – even if the Italdesign founder is not a part of the company anymore.

Last year, Italdesign partnered with Williams Advanced Engineering for developing the EVX modular platform, which sounds ideal for a high-performance GT from a low-volume automaker like DeLorean.

DeLoreans For Sale

Many cars are famous from their starring roles on the small or big screen, but few had the built-in star power of that time-traveling sports car, the DeLorean Motor Company DeLorean.

Former GM executive John Z. De Lorean had no idea his Northern Ireland-…. Many cars are famous from their starring roles on the small…. Many cars are famous from their starring roles on the small or big screen, but few had the built-in star power of that time-traveling sports car, the DeLorean Motor Company DeLorean.

Former GM executive John Z. De Lorean had no idea his Northern Ireland-built two-seater would go Back to the Future, but he did specify it would use a Lotus-designed backbone chassis and a rear-mounted PRV V-6 engine.

Cloaking those mechanicals was a crisp body penned by Italian stylist Giorgetto Giugiaro that retained the flair of the DMC-12 prototype, along with that show car’s vertical-opening “Gullwing” doors.

The real talking point was the DeLorean’s rustproof stainless steel bodywork, which covered a fiberglass inner structure.

Fewer than 8,600 DMC DeLoreans were built in 1981 and 1982, but a strong OEM parts supply, continuing performance developments, and the enduring popularity of its movie appearances, mean there will always be a demand for this iconic Eighties ride.

DMC’S DeLorean EV Reveal Date Confirmed With New Teaser Image

DMC. the latest tech news, global tech news daily, tech news today, startups, usa tech, asia tech, china tech, eu tech, global tech, in-depth electronics reviews, 24h tech news, 24h tech news, top mobile apps, tech news daily, gaming hardware, big tech news, useful technology tips, expert interviews, reporting on the business of technology, venture capital funding, programing language.

Earlier this year, DeLorean Motor Company confirmed that the iconic DeLorean made famous by Back to the Future is making its return as an electric vehicle.

We’re now getting our second sneak peek at the stunning EV and confirmation that all will be revealed on April 18th. The “DeLorean EVolved” will be an all-electric luxury vehicle with gull-wing doors, tons of power, and a completely new take on the famous car.

In February, the initial teaser images said it was coming in 2022, and a complete prototype of the DeLorean EV would be on display at Pebble Beach on August 21st. Fans can see the car in the concept lawn section.

Today DMC announced that they’re moving things up and will officially reveal the all-new DeLorean EV on April 18th. While the press release says that’s the “Reveal date,” a post on Twitter says the car is “Coming into focus” on the 18th. Let’s clear things up a bit.

In the press release, DeLorean Motor Company said it plans to share the official name of the EV on the 18th. The original Back to the Future car is still called by its pre-production designation to this day, the DMC-12.

Either way, come April 18th, the DMC DeLorean will officially arrive as a futuristic luxury car.

‘New’ DeLorean DMC-12 Should Be Ready By Fall 2021, Exec Says

DeLorean is perhaps the most famed extinct car company on the face of this Earth, largely thanks to its starring role in Back to the Future… and probably because of the way the company came crashing down.

Almost four years ago, DeLorean Motor Company made a splash and said it planned to build “New” DMC-12 models from new and old stock.

DeLorean may soon be able to kick off production, Hagerty reports.

You see, it wasn’t because DeLorean didn’t want to build the cars, or didn’t have the means, it was simply still against the law.

There are still a few hurdles, but DeLorean is closer than ever, the company’s Vice President James Espey told Hagerty.

DeLorean’s Espey told Roadshow that “Realistically, I wouldn’t expect to see production begin until at the earliest this time next year.” He added summer or fall of 2021 is an even better timeframe for when we’ll see the “New” cars hit the road. Sorting through the public comment period for the regulations and OMB review will likely take the entire year, especially with an election on the horizon, Espey also noted.

Plans for a reborn DeLorean DMC-12 include a new engine and modern amenities, but the same iconic looks fans know and love.

DeLorean Motor Company has revealed a teaser of its first all-electric sports car ahead of its debut at Pebble Beach in August, marking the return of the iconic nameplate from the original doomed project of the 1980s for a new generation.

Infamous for the controversy surrounding John DeLoren’s downfall after he was charged for trafficking $24 million of narcotics into the United States, it led to the collapse of the British Government backed DeLorean Motor Company, despite the original DeLorean DMC-12 going on to find fame in the film franchise Back to the Future.

Today’s DeLorean has little to do with the former, with the brand reborn by Stephen Wynne who purchased the rights to the company in 1995 and has established a new headquarters in San Antonio, Texas – a far cry from the suburbs of Belfast where the original DMC was located.

The new era of DeLorean, unsurprisingly, finds its basis as an electric sports car manufacturer, where it has once again partnered with ItalDesign to create a modern electric sports car with more than a few nods to the DMC-12.

Very little in the way of technical information has been so far revealed by DeLorean, but we do know that its form will be loosely inspired by the original, with a compact two-seater coupe body defined by gullwing doors.

As portrayed by shutlines seen on the rear deck, the new DeLorean will also feature an active rear wing, which itself creates a completely different silhouette to the iconic original.

Where the new DeLorean will sit in relation to other electric sports cars is still to be confirmed, but given the nature of the brand and the previous DMC-12’s focus on accessibility it’s unlikely to be a seven figure electric hypercar in the vane of the Lotus Evija or Pininfarina Battista.

The DeLorean Is Back: Iconic Car Will Return As Electric Concept

The new-look DeLorean electric vehicle will be revealed on August 18, 2022 One of the most iconic cars in all of movie history appears to be on its way back as a new electric car concept.

The DeLorean Motor Company of Texas, which owns the rights to the name and design of the original DMC-12 sports car, has teased the reveal of a new project.

Despite being a notoroiously bad car to drive, it was made famous by the Back to the Future films in the 1980s.

Eventually, DeLorean filed for bankruptcy and the car was consigned to history.

The famous scene in Back to the Future where the Delorean is sent back in time Back in 1995, a car mechanic from Liverpool called Stephen Wynne acquired the trademark on the company name and logo.

Now, it appears the company is going to join the electric car market with what would be only the second ever vehicle to feature the DeLorean name.

‘Excitement is rising like the doors of our iconic sports car, and we are revealing the next generation prototype 3 days earlier than planned on the most prestigious stage at Pebble beach’ Troy Beetz, CMO of DeLorean Motor Company, said in a press release.

The DeLorean EV Will Be Unveiled On August 18th

After years of teasing, the DeLorean Motor Company announced on Monday that it will unveil an all-electric vehicle on August 18th, promising to share its official name at the same time.

Details on the concept car are scant, but what the automaker did share is that it worked with Italdesign, best known for its work with Volkswagen, to design the upcoming car.

Judging from the DeLorean’s website, the vehicle will feature the iconic gull-wing doors of the DMC-12.

To be clear, the company making the DeLorean EV isn’t the same one that produced the DMC-12.

The DeLorean Motor Company of Texas is known for restoring vintage DeLorean vehicles, billing itself as the largest source of parts for the defunct brand that made the original.

We’ll also note it’s been talking about electrification since 2011 when it said it was working on making an all-electric DeLorean with a 100-mile range.

All products recommended by Engadget are selected by our editorial team, independent of our parent company.

DeLorean Motor Company

The DeLorean Motor Company was an American automobile manufacturer formed by automobile industry executive John DeLorean in 1975.

The DeLorean was memorably featured in the Back to the Future film trilogy as the model of car made into a time machine by eccentric scientist Doc Brown, although the company had closed down before the first film was made.

In 1995, Liverpool-born mechanic Stephen Wynne founded the current DeLorean Motor Company located in Humble, Texas, and shortly thereafter acquired the remaining parts inventory and the stylized “DMC” logo trademark of DeLorean Motor Company.

Besides some early seed capital from Hollywood stars, the DeLorean Motor Company relied on the British Government for about $120 million of its $200 million startup costs according to The Times.

In response to the income shortfall, a restructuring plan was devised where a new “DeLorean Motors Holding Company” would be formed, which in turn would have become corporate parent to DMC and each of its subsidiaries: DeLorean Motor Cars Limited, DeLorean Motor Cars of America and DeLorean Research Partnership.

In January 1982, due to United States Securities and Exchange Commission questions about the company’s viability, the company was forced to cancel the stock issue for the holding company that DeLorean had hoped would raise about $27 million.

In particular, DMC, operates under entirely new ownership and with no direct ties to the original DeLorean Motor Company.

DeLorean Motor Company

Gas? Where we’re going, we don’t need gas.

DeLorean Motor Company, the short-lived 1980s automaker behind the DMC DeLorean sports car turned pop culture staple thanks to the Back to the Future franchise, is returning with an EV model.

The DeLorean EV concept has just recently been teased, but its official reveal has now been moved up three days alongside an enticing teaser image.

The DeLorean Will Be Reborn As An Electric Concept Car In August 2022

The DeLorean is an iconic vehicle – stainless steel body, gull-wing doors – and maybe the most famous movie car of all time.

So you’d be remiss if you thought you were traveling back in time when you saw a headline claiming the DeLorean was about to be reborn as an electric vehicle and thought to yourself, “Didn’t I read that already?”.

Just to recap: The company that owns the branding rights and supplies parts to the several thousand vintage DeLorean sports cars that still exist announced that it will be revealing an electric concept car at the Pebble Beach Concours d’Elegance in August.

The company released a teaser video in 2016 promising a reborn DeLorean – but nothing came of it.

This reimagined take on the original DMC-12 will be a concept car, which is a polite way of saying “Vaporware.” There’s no indication that the current DeLorean company has the money or manufacturing capacity to start churning out electric versions of John Z. DeLorean’s classic coupes.

The company scored a win last year when the National Highway Traffic Safety Administration gave the green light to low-volume production of vintage replica cars, meaning there’s a better chance we get brand new replica DMC-12s before the electrified DeLorean hits the road. That said, the DeLorean Motor Company does appear to be willing to milk this sucker for everything it’s worth.

The official reveal will take place August 18th. But before you start dusting off your 80s-era puffy vests and Nike high-tops, it’s worth noting that DeLorean says it’s working with Italdesign, a prestigious design shop that’s owned by Volkswagen.

DeLorean Motor Company Planning A Comeback With Global Headquarters In San Antonio

SAN ANTONIO – The DeLorean Motor Company is heading to the future – the future of electric vehicles.

DeLorean and the City of San Antonio on Monday announced that the brand is making a comeback and planting its global headquarters at Port San Antonio on the Southwest Side.The headquarters will bring 450 jobs in the areas of executive, management and engineering, a news release states.

“By planning to establish their global headquarters in San Antonio, DeLorean is validating the talent, strategic preparation, and adaptability our region provides for EV manufacturers to thrive,” he said in the release.

Ad.With the news out, DeLorean says it will focus on growth nationally and internationally while providing jobs in San Antonio.

“We are grateful for the tremendous support we’ve received from the community. San Antonio boasts a growing component and vehicle manufacturing sector as well as a wide array of global advanced manufacturing operations,” Joost de Vries, CEO of DeLorean Motor Company, said in the release.

Port San Antonio, located in District 4, has transformed the former Kelly Air Force Base into a hub for innovation, technology and education.

Ad.”Port San Antonio is a growing and nationally important destination for innovators and their collaborators-from other industries on our campus and in our region to a world-class array of educators and research partners,” Port San Antonio CEO Jim Perschbach said in the release.

Back To The Future

Marty McFly, a typical American teenager of the Eighties, is accidentally sent back to 1955 in a plutonium-powered DeLorean “Time machine” invented by a slightly mad scientist.

During his often hysterical, always amazing trip back in time, Marty must make certain his teenage parents-to-be meet and fall in love – so he can get back to the future.

A classic masterpiece the original the only best my favorite time travel film of all time.

An excellent sci-fi, adventure epic, I LOVE the 80s. It’s simple the greatest time travel movie ever happened in the history of world cinema.

I firstly saw this movie in the early 90’s as a kid on VHS tape and I was blow away by the action and the score and the title back to the future.

Marty was told to record Doc’s first time travel to the future.

After killing Doc they turn towards to Marty and without any intention Marty enters the Time Traveling car.

Back To The Future

In the years since its release, Back to the Future has grown in esteem and is now considered to be among the greatest films of the 1980s, one of the best science-fiction films ever made, and one of the greatest films of all time.

The film was followed by two sequels, Back to the Future Part II and Back to the Future Part III. With its effect on popular culture and a dedicated fan following, Back to the Future launched a multimedia franchise.

Initially, Back to the Future was scheduled to be released in May 1985, but was pushed back to June 21, the earliest Zemeckis could have the film ready.

This made it the third-highest-grossing film behind the romantic drama Out of Africa and Rocky IV. Cumulatively, Back to the Future earned a worldwide gross of $381.1 million, making it the highest-grossing film of 1985 worldwide, ahead of Rocky IV and Rambo: First Blood Part II. Back to the Future has received several theatrical re-releases to celebrate anniversaries, including a remastered version screened in 2010.

In October 2015-the day Doc and Marty travel to at the end of Back to the Future, as depicted in Back to the Future II-an estimated 27 million social media users discussed the films; the most active users were in the United States, Mexico, the United Kingdom, Canada, and Brazil.

He referenced the film during his 1986 State of the Union Address to appeal to America’s young voters, saying, “Never has there been a more exciting time to be alive, a time of rousing wonder and heroic achievement. As they said in the film Back to the Future, ‘Where we’re going, we don’t need roads’.” Back to the Future is also seen as being responsible for a resurgence in the popularity of skateboarding in the 1980s.

Written by Gale and Zemeckis, the sequel script was so long it was split into two films, Back to the Future Part II and Back to the Future Part III; both films were shot back to back.

Smurfit Kappa To Withdraw From Russia Over Ukraine Invasion

Understand the impact of the Ukraine conflict from a cross-sector perspective with the GlobalData Executive Briefing: Ukraine Conflict.

Irish corrugated packaging company Smurfit Kappa has announced its decision to exit the Russian market as the country’s invasion of Ukraine continues.

Smurfit Kappa said that it will implement the exit ‘in an orderly manner’ and continue to pay its employees and comply with legal obligations during the process.

The company is understood to have around 800 employees in Russia.

“In a statement, Smurfit Kappa said:”Smurfit Kappa stands in solidarity with the people of Ukraine and everyone impacted by the totally unjustified attack on Ukraine and its people.

Prior to this announcement, Smurfit Kappa suspended all imports and exports to and from Russia, as well as any short and long-term investments in the country.

Based in Dublin, Smurfit Kappa provides paper-based packaging for more than 30 countries.

Smurfit Kappa To Exit Russia

Smurfit Kappa Group has decided to exit the Russian market.

The group has already suspended support for its Russian operations including any imports and exports and any short or long-term funding.

“In a statement released on Friday, the corrugated and paper-based packaging company said:”This exit will be effected In an orderly manner, during which we will continue to pay our employees and fulfil our legal obligations.

Our Russian business represents less than 1% of forecasted sales.

“Smurfit Kappa stands in solidarity with the people of Ukraine and everyone impacted by the totally unjustified attack on Ukraine and its people. The group is providing, and will continue to provide, substantial humanitarian support for the Ukrainian people.”

“We are also assisting the families of SKG employees and contractors from Ukraine as well as providing products and services to support the relief effort together with financial assistance to a number of aid agencies. We have also partnered with the Red Cross to provide funding to support their vital work.”

Last year Smurfit Kappa installed a Kongsberg cutting table at its Abercarn factory as the centrepiece of its new ‘Big Box’ design suite, which offers a next day XXL packaging prototyping service.

Smurfit Kappa Group Plc. SWOT & PESTLE Analysis

About Smurfit Kappa Group plc :The Smurfit Kappa Group plc, Europe’s leading corrugated packaging company is headquartered in Dublin, Ireland.

Smurfit Kappa’s vision statement reads “Our vision is to be a globally admired business, dynamically delivering secure and superior returns for all stakeholders. How we do this, goes beyond dynamic business performance. We strongly believe in our responsibility to our people, our environment and the countries in which we operate.” Smurfit Kappa Group plc Revenue 9,048 million – FY ending 31st December 2019€ 8,946 million – FY ending 31st December 2018 Competitive Analysis of Smurfit Kappa Group plc.

SWOT. PESTLE. The SWOT analysis for Smurfit Kappa Group is presented below in a matrix followed by the detailed analysis report.

Smurfit Kappa Group SWOT & PESTLE Analysis PDF Report is a custom report and will be delivered to your email inbox within 2 business days from purchase.

Market leader in packaging solutions in Europe and America: Smurfit Kappa Group has presence in 35 countries and a strong presence in Europe and America.

Smurfit Kappa Group SWOT and PESTLE analysis has been conducted by Tej Narayan Shaw from IISWBM, Kolkata and reviewed by senior analysts from Barakaat Consulting.

Copyright of Smurfit Kappa Group SWOT and PESTLE Analysis is the property of Barakaat Consulting.

Smurfit Kappa Group Cut To Strong Sell At Zacks Investment Research

Zacks Investment Research downgraded shares of Smurfit Kappa Group from a buy rating to a strong sell rating in a research report released on Thursday, Zacks.com reports.

According to Zacks, “Smurfit Kappa Group PLC operates as a paper and paperboard manufacturer and converter. It also engages in the manufacturing, distribution and selling of containerboard, corrugated containers and other paper-based packaging products, such as solid board, graphic board and bag-in-box. The company’s operating segments consists of Europe and Americas. Europe segment includes a system of mills and plants which primarily produces containerboard. Americas segment comprises forestry, paper, corrugated, paper sack and folding carton activities. Smurfit Kappa Group PLC is headquartered in Dublin, Ireland.”

Separately, Credit Suisse Group upped their target price on shares of Smurfit Kappa Group from €58.00 to €60.00 and gave the stock an outperform rating in a research note on Thursday, February 10th. One analyst has rated the stock with a sell rating, two have assigned a hold rating and five have assigned a buy rating to the company’s stock.

Shares of Smurfit Kappa Group stock opened at $44.98 on Thursday.

Smurfit Kappa Group has a 52 week low of $37.83 and a 52 week high of $60.34.

Smurfit Kappa Group plc, together with its subsidiaries, manufactures, distributes, and sells paper-based packaging products.

Get a free copy of the Zacks research report on Smurfit Kappa Group.

Smurfit Kappa Foundation

Our goal is to end the cycle of poverty and dependence that exists in our communities.

The Smurfit Kappa Group Foundation was formed in 2011 when the Board of Smurfit Kappa decided to donate funds over the subsequent years.

The aim of the Foundation is to fund projects in the communities in which we operate, particularly those which are sustainable and focus on helping young and disadvantaged children through health and nutrition, basic care and early education.

Our goal is to end the cycle of poverty and dependence that exists in some of the communities and countries in which we operate, using the United Nations Sustainable Development Goals as a guide.

Smurfit Kappa

The Smurfit Kappa Group plc is Europe’s leading corrugated packaging company and one of the leading paper-based packaging companies in the world.

The company was established as a box-maker in Rathmines, Dublin, Ireland in 1934 and was acquired by Mr Jefferson Smurfit in 1938, trading afterwards as Jefferson Smurfit.

Jefferson Smurfit grew under the leadership of the founder’s son, Sir Michael Smurfit, who became Chief Executive in 1977.

Jefferson Smurfit was the subject of a management buyout financed by Madison Dearborn Partners, Cinven Limited and CVC Capital Partners in 2002.

It merged with Kappa Packaging in 2005, changing its name to Smurfit Kappa, and was the subject of an initial public offering in 2007.

The company specialises in manufacturing paper-based packaging, with a network of paper, recycling and forestry operations.

It is an integrated producer, with packaging plants sourcing the major part of their raw material requirements from the company’s own paper mills.

Medical Waste

Medical waste is a subset of wastes generated at health care facilities, such as hospitals, physicians’ offices, dental practices, blood banks, and veterinary hospitals/clinics, as well as medical research facilities and laboratories.

Generally, medical waste is healthcare waste that that may be contaminated by blood, body fluids or other potentially infectious materials and is often referred to as regulated medical waste.

EPA has not had authority, specifically for medical waste, since the Medical Waste Tracking Act of 1988 expired in 1991.

Concern for the potential health hazards of medical wastes grew in the 1980s after medical wastes were washing up on several east coast beaches.

EPA’s Office of Air Quality Planning and Standards continues to review and revise the Hospital Medical Infectious Waste Incinerator standards as required most recently in May of 2013.Alternative Treatment and Disposal Technologies for Medical Waste.

The alternative treatments are generally used to render the medical waste non-infectious then the waste can be disposed of as solid waste in landfills or incinerators.

EPA has jurisdiction over medical waste treatment technologies, which claim to reduce the infectiousness of the waste by using chemicals.

Environmental Guidelines

1399-1402 Although hospital wastes had a greater number of different bacterial species compared with residential waste, wastes from residences were more heavily contaminated.

2 Health-care facility medical wastes targeted for handling and disposal precautions include microbiology laboratory waste, pathology and anatomy waste, blood specimens from clinics and laboratories, blood products, and other body-fluid specimens.

The categorization of these wastes has generated the term “Regulated medical waste.” This term emphasizes the role of regulation in defining the actual material and as an alternative to “Infectious waste,” given the lack of evidence of this type of waste’s infectivity.

Regulated medical wastes are treated or decontaminated to reduce the microbial load in or on the waste and to render the by-products safe for further handling and disposal.

Current laboratory guidelines for working with infectious microorganisms at biosafety level 3 recommend that all laboratory waste be decontaminated before disposal by an approved method, preferably within the laboratory.

Among the suggested control measures was that health-care facilities perform on-site decontamination of laboratory waste containing live cultures of microorganisms before release of the waste to a waste management company.

1412 State medical waste regulations can complicate or completely prevent this transfer if these cultures are determined to be medical waste, because most states regulate the inter-facility transfer of untreated medical wastes.

What Is Medical Waste?

At some point you’ve probably used health-related supplies that created some type of medical waste.

Waste from people with infections, like swabs, bandages, and disposable medical supplies.

Labs or sites that do COVID-19 tests, for example, treat all medical waste as biohazardous.

You make this type of waste at home when you do things like throw out a disposable mask, take a rapid COVID test, use a medical sharp, or flush unused medication.

Because hospitals often burn infectious medical waste, in the late 1990s the Environmental Protection Agency set tighter emissions standards meant to curb air pollution from it.

Some alternative treatments use microwave technology, steam sterilization, or chemical mechanical systems to render medical waste noninfectious, which makes it safe to go in a landfill.

The coronavirus pandemic has led to hospitals creating tens of thousands of metric tons of medical waste from used test kits, syringes, needles, and other objects.

MEDICAL WASTE RISKS AND IMPACT ON HEALTH AND THE ENVIRONMENT 16 MEDICAL WASTE MANAGEMENT 3.1 Persons potentially exposed All persons who are in contact with hazardous medical waste are potentially exposed to the various risks it entails: persons inside the establishment generating the waste, those who handle it, and persons outside the facility who may be in contact with hazardous wastes or their by-products, if there is no medical waste management or if that management is inadequate.

FUNDAMENTAL PRINCIPLES OF A WASTE MANAGEMENT PROGRAMME Duties of the water and habitat engineer The water and habitat engineer is responsible for: > carrying out an initial assessment of the waste situation; > proposing a waste management plan to the working group that is in line with any existing national waste management plan; > planning the construction and maintenance of waste storage and disposal facilities; > assessing the environmental impact of waste management; > regularly analysing risks for the personnel; > supervising the local waste manager; > training.

Sharps Suitability of treatment techniques by type of waste Type of waste / Technique Table 10.1 after decontamination yes no small quantities yes small quantities no yes after decontamination yes no no no no yes 3a. Medicinal waste yes no yes yes with precautions yes yes yes 2c. Infectious waste no no no small quantities yes no no no no yes 3d. Chemical waste 60 MEDICAL WASTE MANAGEMENT 10.

Waste policy 4.1 Are there any national legislative provisions on waste management? If so, what are they? 4.2 Is there any national waste management plan? 4.3 Is there any waste management plan in the health facility itself? 4.4 What is the local practice regarding anatomical waste? 4.5 At what depth is the water table? 4.6 Is any budget allocated to waste management? Name, qualifications, training Description 131 132 MEDICAL WASTE MANAGEMENT 5.

Landfill in-site Lopiding note28 Incinerator Safety boxes Yes Green bags or drums or plastic buckets Waste that has been in contact with biological liquids? Pathological waste? Sharps? Treatment in Nairobi X-ray chemicals No Recycled – refilled Landfill in-site Lopiding Not possible to recycle Pressurised containers Landfill off-site, Nanam Youth Association Yes No Domestic waste? Example of a waste flow diagram29 Sharps Annex 3.3 134 MEDICAL WASTE MANAGEMENT ANNEX 3 Annex 3.4 135 Audit checklist Date: Filled in by: Post: > Y = yes > N = no > SE = to some extent > NA = does not apply 1.

General issues 1.1 Is the working group operational? Are the definitions of the duties of each group member updated? 1.2 Is the reporting on waste quantities carried out correctly? Has there been a significant increase in the quantity of waste generated? If so, why? 1.3 Are the resources provided sufficient for implementing the waste management plan? 1.4 Is the situation at the national level still the same? Is there a new national or regional waste management plan? Y/N/SE/NA Comments, measures to be taken 136 MEDICAL WASTE MANAGEMENT 2.

Minimization 2.1 Is care being taken to implement the waste minimization policy – i.e. to reduce the quantity of waste generated at source? 2.2 Is care being taken to avoid re-using needles and syringes? 2.3 Is purchasing policy with a view to minimizing hazardous wastes being applied – i.e. PVCfree and mercury-free supplies, choice of less toxic substances, safe injection equipment? 2.4 Are the following wastes recycled: paper, glass, metals, PET plastic, plant waste, photographic developers? 2.5 Is the purchasing of chemicals and drugs centralized? Is stock management satisfactory Y/N/SE/NA Comments, measures to be taken ANNEX 3 3.

What Is Medical Waste

ASK FOR A WASTE CONSULTATION. Don’t lump medical waste into a single category.

In any healthcare environment, every individual working in that facility should know how to categorize different medical waste streams for appropriate biomedical waste management.

The Environmental Protection Agency offers their definition of medical waste as any “Solid waste which is generated in the diagnosis, treatment, or immunization of human beings or animals.” That can define anything from protect personal equipment to needles, syringes, bandages, or biopsy tissues, and more.

The Occupational Safety and Health Administration offers their definition of medical waste as any “Red bag or infectious waste containing blood or bodily fluids that are: pourable, dripable, squeezable, or flexible.” This definition seems to imply that medical waste is only something that contains blood or blood products or other body fluids.

Follow guidelines of the EPA in identifying regulated medical waste, or any type of infectious medical or biohazard waste.

What exactly is biomedical waste? Biomedical waste is defined as any type of medical waste that has the potential to be hazardous or infectious to humans.

Biohazard waste is to be disposed of in red regulated medical waste containers or red liners inside containers.

Health Hazards Of Medical Waste And Its Disposal

Keywords: Hospital, Medical waste, Management, Infection, Hazard, Risk, WHO.”Health care activities lead to the production of waste that may lead to adverse health effects. Most of this waste is not more dangerous than regular household waste. However, some types of health-care waste represent a higher risk to health. These include infectious waste, among which are sharps waste, body part waste, chemical or pharmaceutical waste, and radioactive and cytotoxic waste or broken thermometers.”

In seeking effective solutions for the disposal of medical wastes in developing-world health-care settings, it is necessary to design and build a sustainable system for managing medical waste.

As a minimum, managers responsible for health-care waste should conduct a walk-through of the facility to identify the medical areas that produce waste, to obtain an initial estimate of the types and quantities of waste generated, and to understand how the waste is handled and disposed of.

What about the waste and by-products they generate? Of the total amount of waste generated by health-care activities, about 85% is general, nonhazardous waste comparable to domestic waste.

A person who experiences one needle-stick injury from a needle used on an infected source patient has risks of 30%, 1.8%, and 0.3%, respectively, of becoming infected with HBV, HCV, and HIV.Additional hazards occur from scavenging at waste disposal sites and during the manual sorting of hazardous waste from health-care facilities.

Waste Management: Reasons for FailureLack of awareness about the health hazards related to health-care waste, inadequate training in proper waste management, absence of waste management and disposal systems, insufficient financial and human resources, and the low priority given to the topic are the most common problems connected with health-care waste.

Liaising with department heads, the waste-management officer, the matron, and the hospital manager, and giving advice, in accordance with the national policy and guidelines, on the appropriate procedures for pharmaceutical waste treatment and disposal; coordinating continual monitoring of procedures for the treatment and disposal of pharmaceutical waste; ensuring that personnel involved in pharmaceutical waste handling, treatment, and disposal receive adequate training; remaining up to date with the proper treatment and safe disposal of expired, damaged, and unusable pharmaceuticals, pharmaceutical packaging, and equipment.

T.J. Dillashaw

Dillashaw was born in Sonora, California, to Hal and Janice Dillashaw.

After graduating from Cal State Fullerton, Dillashaw contemplated turning to MMA. Mark Muñoz coached at Cal St. Fullerton for 3 years, while competing in the UFC middleweight division and invited Dillashaw to join the Reign Training Center fighter class at the conclusion of his senior year.

After training with Team Reign for a year and a half, Munoz encouraged Dillashaw to move up north closer to his hometown of Angels Camp, CA to Team Alpha Male in Sacramento, CA. Dillashaw began training with Team Alpha Male, and collected a 2-0 amateur record before turning pro.

Two months later, Dillashaw returned to fight Brandon Drucker, winning the fight via first round submission.

Dillashaw defeated Jaggers in the first round via TKO. Dillashaw was selected as a part of Team Bisping, he was the second bantamweight chosen for the team.

In one of the biggest upsets in UFC and MMA history, Dillashaw won the fight in dominant fashion, defeating Barão via TKO in the fifth round to become the new UFC Bantamweight champion.

In January 2017, the UFC announced that Dillashaw would be one of the coaches, opposite current UFC Bantamweight champion Cody Garbrandt on The Ultimate Fighter 25, with the pairing expected to face each other on July 8, 2017 at UFC 213.

TJ Dillashaw

UFC Fight Night Dillashaw was stopped by Henry Cejudo via strikes at :32 of the first round in a fight for the UFC flyweight title.

UFC 227 Dillashaw stopped Cody Garbrandt via strikes at 4:10 of the first round to retain the UFC bantamweight title.

UFC Fight Night Dillashaw lost a five round split decision to Dominick Cruz, losing his UFC bantamweight title.

UFC on FOX Dillashaw stopped Renan Barao via strikes at :35 of the fourth round to retain his UFC bantamweight title.

UFC 177 Dillashaw knocked out Joe Soto at 2:20 of the fifth round to retain his UFC bantamweight title.

UFC 173 Dillashaw stopped Renan Barao via strikes at 2:26 of the fifth round to win the UFC bantamweight title.

UFC Fight Night Dillashaw won a three round unanimous decision over Mike Easton.

UFC Champion T.J. Dillashaw Joins Georgia Based Cannabis Co. As Director Of Marketing & Advisory Board Member

American Cannabis Partners announced that it has welcomed two-time UFC champion and accomplished entrepreneur T.J. Dillashaw as director of marketing and an advisory board member.

Dillashaw’s credentials include being a successful franchisee and area developer for a rapidly-growing certified organic juice bar company, and bringing new retail business to a sports nutrition and functional energy beverage company, for which he serves in a leadership capacity for marketing and business development.

“With T.J.’s business track-record and American Cannabis Partners’ proficiency in managing profitable operations, the decision to team up was excitingly easy,” Stephen Jordan, ACP’s CEO, said.

Dillashaw will strengthen ACP’s marketing initiatives and the ZüK brand’s launch across the US, focusing on business and consumer relations.

“I am excited to join ACP Farms because of ACP’s innovative approach and the potential for growth that I foresee for the company,” Dillashaw said.

Looking forward, Zük is developing THC based edibles and beverages to add the product line.

Dillashaw’s publicity experience gives him the natural ability to identify with Zük’s consumers and provide a cannabis educational program to serve as a teaching mechanism for both internal and external audiences, articulating ACP’s long-term mission regarding the cannabis industry’s progression and its effects on various communities.

Stephen Jordan, ACP’s Chief Executive Officer, said “I am pleased to welcome T.J., a two-time mixed martial arts bantamweight champion and accomplished entrepreneur, to ACP. We embrace this unique opportunity to combine our strengths and accelerate our continued expansions in the cannabis space. With T.J.’s business track-record and American Cannabis Partners’ proficiency in managing profitable operations, the decision to team up was excitingly easy.”

Dillashaw’s credentials include being a successful franchisee and area developer for a rapidly-growing certified organic juice bar company, and bringing new retail business to a sports nutrition and functional energy beverage company, for which he serves in a leadership capacity for marketing and business development.

Dillashaw described his reason for joining ACP as “I am excited to join ACP Farms because of ACP’s innovative approach and the potential for growth that I foresee for the company. Many cannabis companies have approached me for endorsements and as potential employers; until now, I have rejected every overture. None has demonstrated the professionalism, due diligence in partnering, and thoughtful corporate structure of ACP Farms. As a professional athlete, I am confident that my image and reputation are in good hands with ACP Farms.”

ADVERTISEMENT.Dillashaw will strengthen ACP’s marketing initiatives and the ZüK brand’s launch across the US, focusing on business and consumer relations.

Dillashaw’s publicity experience gives him the natural ability to identify with Zük’s consumers and provide a cannabis educational program to serve as a teaching mechanism for both internal and external audiences, articulating ACP’s long-term mission regarding the cannabis industry’s progression and its effects on various communities.

ACP is a privately held, investor-centric company that has been in the cannabis space since 2018 and has expanded as a multi-state operator with 14 licenses and 560,000 square feet of cultivation, lifestyle branding and retail.

The company is nationally headquartered in Trinity County of Northern California’s Emerald Triangle.

TJ Dillashaw Opens New Clean Juice Bar In Agoura Hills

Clean Juice, the first USDA-certified organic juice bar franchise, has looked to inform customers about the benefits of eating organic since 2015 by opening its doors to the community of Agoura Hills with the help of MMA fighter TJ Dillashaw at a new location.

After helping open Clean Juice’s flagship Yorba Linda location, Dillashaw found that Clean Juice’s brand and mission was perfectly suited to the lifestyle of many Southern Californians and decided to become the area developer for the rapidly expanding juice bar.

“It’s got all the family lifestyles, and that’s what really intrigued me about Clean Juice. I have a 4-year-old son, and I want him to develop good eating habits and eat the right way at a young age, things maybe I didn’t know when I was a kid. He thinks Clean Juice is a treat. We get him a healthy acai bowl or kids smoothie. The family dynamic of Clean Juice is great, and it’ll do so well at Agoura Hills because of that.”

Through partnering with Clean Juice to help open a new location on Kanan Road, Dillashaw wants to further inspire and offer opportunities for customers of all ages to eat healthier and boost their diet.

One of the defining traits of Clean Juice is that its juices are made daily, a fact that Dillashaw insists is of utmost importance when maintaining a nourishing diet.

By bringing Clean Juice to Agoura Hills, Dillashaw and Clean Juice are looking to embrace the spirit of community and to create a family atmosphere around eating and drinking healthy organic ingredients.

To learn more about Clean Juice’s mission and the benefits of an organic diet, visit cleanjuice.com or its new location at 5811 Kanan Road, Agoura Hills.

Dillashaw Enters UFC On ESPN 27 With Some Convincing To Do

Cody Garbrandt has long insisted his former Team Alpha Male stablemate was cheating well before that, but that’s a claim that simply can’t be proven, especially considering Dillashaw passed nearly 40 tests from USADA before his failure.

Dillashaw didn’t blame an unmarked blue vial of sexual enhancer for the violation.

Dillashaw simply admitted his error and served his time.

Well, on Saturday, Dillashaw will return to action for the first time since January 2019, taking on top contender Cory Sandhagen in the headlining bout of UFC on ESPN 27 in Las Vegas.

With Sandhagen checking in at No. 3 in the latest USA TODAY Sports/MMA Junkie bantamweight rankings, a spectacular win for Dillashaw could potentially catapult him directly into a title shot – an opportunity that he welcomes with open arms.

If Dillashaw can show he’s still in vintage form, complete with crafty footwork, a relentless pace, and a scintillating variety of attack angles, then with each performance, he can put a little more space between his darkest days and the current one.

Time will tell if he delivers on that promise, and perhaps only in retrospect will we be able to properly tell the full story of Tyler Jeffrey Dillashaw.

T.J. Dillashaw Steps Into The Cannabis Ring

Stephen Jordan, ACP’s Chief Executive Officer, said “I am pleased to welcome T.J., a two-time mixed martial arts bantamweight champion and accomplished entrepreneur, to ACP. We embrace this unique opportunity to combine our strengths and accelerate our continued expansions in the cannabis space. With T.J.’s business track-record and American Cannabis Partners’ proficiency in managing profitable operations, the decision to team up was excitingly easy.”

Dillashaw’s credentials include being a successful franchisee and area developer for a rapidly-growing certified organic juice bar company, and bringing new retail business to a sports nutrition and functional energy beverage company, for which he serves in a leadership capacity for marketing and business development.

Dillashaw described his reason for joining ACP as “I am excited to join ACP Farms because of ACP’s innovative approach and the potential for growth that I foresee for the company. Many cannabis companies have approached me for endorsements and as potential employers; until now, I have rejected every overture. None has demonstrated the professionalism, due diligence in partnering, and thoughtful corporate structure of ACP Farms. As a professional athlete, I am confident that my image and reputation are in good hands with ACP Farms.”

Dillashaw will strengthen ACP’s marketing initiatives and the ZüK brand’s launch across the US, focusing on business and consumer relations.

Dillashaw’s publicity experience gives him the natural ability to identify with Zük’s consumers and provide a cannabis educational program to serve as a teaching mechanism for both internal and external audiences, articulating ACP’s long-term mission regarding the cannabis industry’s progression and its effects on various communities.

ACP is a privately held, investor-centric company that has been in the cannabis space since 2018 and has expanded as a multi-state operator with 14 licenses and 560,000 square feet of cultivation, lifestyle branding and retail.

The company is nationally headquartered in Trinity County of Northern California’s Emerald Triangle.

CannabisNewsWire

THC is one of the compounds that the league screens for.

Preliminary studies have also found that the compound’s ability to decrease symptoms of health conditions is actually good for a person’s brain power.

While researchers aren’t completely sure about how this compound interacts with an individual’s brain, they do know that the brain undergoes considerable changes once a CBD product is consumed.

Taking CBD may help improve your cognitive performance as well as your sleep quality.

The best CBD products for sleeping usually have other natural alternatives that promote relaxation, including valerian root and melatonin.

The use of CBD helps decrease anxiety and improves one’s ability to focus.

There is much more to learn about how different cannabis compounds interact with the body, and that could explain why different marijuana users of products sourced from entities such as Cannabis Strategic Ventures Inc. can report different or even contradictory effects when they use those products.

CannabisNewsWatch

Flora Growth, a leading all-outdoor cultivator and manufacturer of global cannabis products and brands, has announced that Colombia has completed its required regulations to allow cannabis companies operating in the country, including Flora Growth, to export THC and CBD dried flower.

The report will also include subsequent events and MD&A. In addition, company management will host a conference call on Continue reading “CannabisNewsBreaks – Red White & Bloom Brands Inc. Announces Earnings Call, 2021 Year-End Results Release Date”.

“Flora Growth, a leading all-outdoor cultivator and manufacturer of global cannabis products and brands, will be participating in the Plant Medicine Week conference, which is scheduled to be held April 5-8, 2022, in Malta. Flora Growth chair and CEO Luis Merchan is the keynote speaker at the four-day event. Merchan’s presentation, titled”Malta Continue reading “CannabisNewsBreaks – Flora Growth Corp.’s CEO Slated to Present Keynote at Upcoming Plant Medicine Week Conference”.

Pono, a publicly traded special purpose acquisition company, and Benuvia, a leading drug developer and manufacturer of active pharmaceutical ingredients focused on cannabinoids, with a growing portfolio of drug products and intellectual property, announced entry into a definitive business combination agreement that will result, subject to the satisfaction or waiver of certain closing Continue reading “CannabisNewsBreaks – Pono Capital Corp, Benuvia Inc. Enter Definitive Business Combination Agreement”.

The company will participate at the event, slated to take place at the Oklahoma City Convention Center Continue reading “CannabisNewsBreaks – Advanced Container Technologies Inc., Grassfire Distro to Exhibit at CannaCon in Oklahoma City”.

“Through its patented DehydraTECH(TM) drug delivery technology that began development in 2014, the company is offering potential solutions for conditions including, but not limited to hypertension, smoking cessation, anti-viral treatments, and other drug classes,” reads Continue reading “CannabisNewsBreaks – Lexaria Bioscience Corp. Optimistic About Its Upcoming, Largest-Ever Hypertension Study”.

Red White & Bloom, a multi-state operator in cannabis and hemp-derived product lines, has built a platform to strengthen its brands, enabling it to wade through the difficulties of increasing product commoditization The company expects to showcase the results of the buildout process in the coming months RWB is also committed to fostering public and Continue reading “Red White & Bloom Brands Inc., Building a House of Brands, Is Creating World-Class Standards for Environmental Impact, Social Justice, and Corporate Governance, to Navigate Increasing Commoditization in its Market Segment”.

CannabisNewsWire Re-Engaged As Official NewsWire And Media

DENVER, Dec. 13, 2021 – via InvestorWire – CannabisNewsWire, a specialized communications platform for the cannabis sector and one of the 50+ brands part of IBN, is pleased to announce its collaboration with NCIA’s upcoming 7th Annual Cannabis Business Summit & Expo in its capacity as the Official NewsWire and Media Sponsor.

NCIA’s 2021 Cannabis Business Summit & Expo will provide cannabis businesses from across the country with the tools to remain ahead of the curve for years to come via 80-plus educational sessions and hundreds of exhibitors from across the cannabis ecosystem.

Joining high-profile keynote speakers, including San Francisco Mayor London Breed and Troy Datcher, CEO of The Parent Company, NCIA’s Cannabis Business Summit & Expo will feature more than 125 presenters from a wide range of cannabis sub-sectors.

Conference attendees will have the chance to learn about a variety of topics through sessions and workshops, including ‘Bridging the Gaps: A Holistic and Actionable Approach to Sustainability,’ ‘Mainstreaming Cannabis as Medicine,’ ‘Pathway to Federal Legalization: An Update From DC,’ ‘Wellness in Action: Elite Athletes as Cannabis Advocates,’ and many others.

“We are delighted to be working with NCIA’s Cannabis Business Summit & Expo again,” says Christopher Johnson, Director of Client Solutions for CannabisNewsWire.

“We are pleased to continue our collaboration with CannabisNewsWire and IBN,” says Aaron Smith, co-founder and CEO of NCIA. “CNW and IBN have built a strong reputation among cannabis businesses and enthusiasts, and we appreciate their partnership in sharing our message with those passionate about the legal cannabis industry and the exciting new products, innovations and practices launching within it.”

About CannabisNewsWire CannabisNewsWire, one of 50+ brands within our InvestorBrandNetwork, is a specialized information service that aggregates cannabis news; provides CannabisNewsBreaks to quickly update investors in the space; enhances corporate press releases; provides social media distribution via IBN to millions of social media followers; and delivers comprehensive corporate communication solutions.

Pasteur

Every day, we work to realize our vision at Sanofi Pasteur: a world in which no one suffers or dies from a vaccine-preventable disease.

Offering the broadest range of vaccines in the world, we distribute more than 1 billion doses of vaccine every year, making it possible to vaccinate over half a billion people worldwide.

As all eyes are on prevention of infectious disease through vaccines, it’s more crucial than ever to seek innovative ways to protect public health.

We are driven to protect people and empower their lives by offering a wide range of vaccination solutions across four main areas: influenza, pediatric vaccines, meninge, travel and endemic.

At Sanofi Pasteur, we believe in a world where no one suffers or dies from a vaccine-preventable disease.

Every day, our people partner with public health, medical and scientific communities around the globe to improve access to life-protecting vaccines and increase vaccination coverage, while working collectively to develop new and improved vaccines to enhance health and empower life.

SHOW ALL POSITIONS. Thank you for your interest in careers at Sanofi Pasteur.

Sanofi Pasteur

Sanofi Pasteur was the vaccines division of the French multinational pharmaceutical company Sanofi.

Sanofi Pasteur is the largest company in the world devoted entirely to vaccines.

Sanofi Pasteur is one of four global producers of the yellow fever vaccine.

Aventis Pasteur, the vaccine division of Sanofi-Aventis Group, changed its name to Sanofi Pasteur.

1974: Pasteur Institute creates Pasteur Production, a subsidiary specializing in manufacturing vaccines.

1978: Connaught Laboratories in Canada acquires the vaccine manufacturing facility at Swiftwater, Pennsylvania, U.S. 1985: Pasteur Production is acquired by the Mérieux Institute, and Pasteur Vaccins is created.

Aventis Pasteur, the vaccine division of the Sanofi-Aventis Group, changes its name to Sanofi Pasteur.

Sanofi Pasteur Workers Resist Vaccine Mandate

Sanofi Pasteur is enforcing a vaccine mandate that may cost hundreds of people their jobs next month.

SWIFTWATER, Pa. – Angela Giaquinto has a choice to make.

She’s one of about 2,500 people employed at Sanofi Pasteur in Swiftwater.

The company says it does not disclose site-specific vaccination rates, so it’s unclear just how many people could be impacted by the mandate.

“I’m really, really hoping that they reconsider things, realizing that there’s a lot of good people that they’re going to lose,” Giaquinto said.

Some employees hoped with COVID-19 cases going down and restrictions easing, Sanofi would drop the mandate.

A Sanofi spokesperson tells Newswatch 16: “While the trends are encouraging, we have all experienced the up and downs of this pandemic and the rise of variants. Sanofi US continues to believe that vaccination is the right course of action.”

Sanofi/GSK COVID-19 Vaccine: What You Should Know

The combined effort between the two companies had Sanofi developing a vaccine using an adjuvant from GlaxoSmithKline.

The vaccine also showed a strong immune response in patients with prior COVID-19 infection, which suggests it may have potential as a booster vaccine, according to Sanofi and GSK. Pending results from the Phase 3 trial, the companies hope to have the vaccine considered for regulatory approval by the end of 2021.

The Sanofi/GSK vaccine candidate is a recombinant protein-based vaccine based on the baculovirus, which is commonly found in moths.

In May 2021, Sanofi and GSK announced that preliminary results from the Phase 2B trial using the amended formula showed that the vaccine achieved comparable antibody levels to people who had COVID-19 and developed antibodies naturally.

In initial, early-stage trials, Sanofi reported that the company’s recombinant vaccine achieved similar antibody levels as those found in people aged 18 to 48 who’d had COVID-19.

The companies want to test the reformulated vaccine against another authorized vaccine rather than a placebo.

Sanofi and GSK are developing the recombinant vaccine with the help of government funding.

Hepatitis A Vaccination

Hepatitis A is a liver disease caused by the hepatitis A virus.

Vaccines are available for long-term prevention of HAV infection in persons 1 year of age and older.

Good personal hygiene and proper sanitation can also help prevent the spread of hepatitis A..

Viral Hepatitis And Liver Disease

The hepatitis A vaccine is a dose of inactive virus that stimulates your natural immune system.

After the hepatitis A vaccine is given, your body makes antibodies that will protect you against the hepatitis A virus.

Vaccination for hepatitis A requires 2 shots, 6 months apart.

The vaccine is given with an injection, into the muscle of the upper arm.

If for some reason the second injection doesn’t take place at 6 months, you can receive the second dose at a later time.

If you need hepatitis B vaccination in addition to hepatitis A, you can do these individually or as a combined vaccine that covers both.

The combination vaccine is given as 3 injections over a 6-month period-an initial dose, followed by a second dose 1 month later, and then a third dose 5 months after the second.

Hepatitis A

Hepatitis A is a serious disease that used to be more common in the United States.

In the 1980s, the United States used to see as many as 30,000 cases a year.

Thanks to the vaccine, the number of hepatitis A cases in the United States has dropped by 95%. There are 2 vaccines that protect against hepatitis A:. The hepatitis A vaccine protects infants, children, and adults from hepatitis A. The hepatitis A and B combination vaccine protects adults from both hepatitis A and hepatitis B..

Hepatitis A Vaccine: Indications, Side Effects, Warnings

Uses of Hepatitis A Vaccine: It is used to prevent hepatitis A infection.

What do I need to tell my doctor BEFORE I take Hepatitis A Vaccine? If you have an allergy to any part of hepatitis A vaccine.

If you are allergic to hepatitis A vaccine; any part of hepatitis A vaccine; or any other drugs, foods, or substances.

You must check to make sure that it is safe for you to take hepatitis A vaccine with all of your drugs and health problems.

What are some things I need to know or do while I take Hepatitis A Vaccine? Tell all of your health care providers that you take hepatitis A vaccine.

What are some other side effects of Hepatitis A Vaccine?

How do I store and/or throw out Hepatitis A Vaccine? If you need to store hepatitis A vaccine at home, talk with your doctor, nurse, or pharmacist about how to store it.

Ask The Experts: Hepatitis A Vaccines

Hepatitis A Disease Issues What is hepatitis A? Hepatitis A is a liver disease common in many parts of the world and caused by hepatitis A virus, a picornavirus that causes acute inflammation of the liver.

What are the hepatitis A vaccines that are approved for use in the United States? Recommended dosages and schedules of hepatitis A vaccines Vaccine Age group Dose Volume # Doses Schedule Havrix(GSK) 1-18 years 720 El.U.* 0.5 ml 2 0, 6-12 mos.

Administering Vaccines Back to top By what method should hepatitis A vaccine be administered? Hepatitis A vaccine should be administered intramuscularly, using the appropriate injection site and needle size as determined by the patient’s age and body mass.

If Twinrix is not available or if you choose not to use Twinrix to complete the Twinrix series, you should do the following: If 1 dose of Twinrix was given, complete the series with 2 adult doses of hepatitis B vaccine and 2 adult doses of hepatitis A vaccine.

If 2 doses of Twinrix were given, complete the schedule with 1 adult dose of hepatitis A vaccine and 1 adult dose of hepatitis B vaccine.

Another way to consider this is as follows: A dose of Twinrix contains a standard adult dose of hepatitis B vaccine and a pediatric dose of hepatitis A vaccine.

We’re thinking of using Twinrix and we’re wondering whether we can use it for doses #1 and #3 only and use single antigen hepatitis B vaccine for dose #2? No. Twinrix contains 50% less hepatitis A antigen component than Havrix, GSK’s monovalent hepatitis A vaccine , so the patient would not receive the recommended dose of hepatitis A vaccine antigen.

Hepatitis Vaccine: What You Need To Know

This article discusses the types of hepatitis that can be prevented with a vaccine and what you need to know before getting one.

Brand names for the hepatitis A vaccine include Havrix and Vaqta, while hepatitis B vaccines include Pediarix, Vaxelis, Engerix-B, Heplisav-B, and Recombivax HB. There is also a combination vaccine that can protect against both hepatitis A and B called Twinrix.

While all children can and should get the hepatitis A and B vaccines, the hepatitis A vaccine can be given to children 12 months or older while the hepatitis B vaccine can be given to newborn infants.

Even if someone does not fall into any of these categories, they can still choose to get vaccinated against both hepatitis A and B. The main use of the hepatitis A and B vaccine is protection against viral infection.

People who have a sexual relationship with someone with the hepatitis virus, have more than one sexual partner, or are living with someone with the virus should get the hepatitis B vaccine.

Hepatitis A vaccines will be given in two doses, whereas hepatitis B can be given in two to four doses.

The hepatitis vaccine is a safe and effective tool to help protect you against two forms of viral hepatitis: A and B. Typically, the vaccines are given to children or infants in a two- or three-dose course so that they are protected from a young age.

Hepatitis A Vaccine: Side Effects & Dosage

What is hepatitis A vaccine? What are the uses for hepatitis A vaccine?

Hepatitis A vaccine is used to prevent hepatitis A, a type of liver disease that is caused by the hepatitis A virus.

The hepatitis A vaccine does not cause hepatitis because it does not contain the live virus.

The hepatitis A vaccine is used for the prevention of disease caused by hepatitis A virus in persons 12 months of age and older.

The primary dose should be given at least 2 weeks prior to expected exposure to HAV. Hepatitis A vaccine was approved in 2005.What brand names are available for hepatitis A vaccine?

Hepatitis A vaccine may be given at the same time as other vaccines.

Hepatitis a vaccine is used to prevent hepatitis A. Side effects, drug interactions, dosing and storage information, and pregnancy safety should be reviewed prior to taking this medication.

NTT DOCOMO Selects Oracle Cloud To Boost Development Capabilities For One Of The World’S Largest Customer Information Management Systems

Japanese mobile operator taps Oracle Cloud Infrastructure to improve service quality and enable faster delivery through automation of operation management utilizing Oracle Container Engines for Kubernetes.

Has adopted Oracle Cloud Infrastructure to build its new development environment for ALADIN, one of the largest customer information management systems in the world.

DOCOMO has moved its on-premises Oracle Database for database training to Oracle Database Cloud Service on OCI. ALADIN supports DOCOMO’s more than 83 million subscriber base, handling all customer-related operations, such as membership and transactional data, credit checks, contract data, and assignment of telephone numbers.

As part of the cloud migration, DOCOMO has also moved its on-premises Oracle Database environment to Oracle Database Cloud Service on OCI. This environment is used by database administrators from dedicated devices to verify and train database recovery procedures and conduct training, including the reproduction of failure conditions in an environment similar to the commercial environment.

With the move to Oracle Database Cloud Service, DOCOMO can enjoy Oracle’s pay-as-you-go service and provide database administrators with the flexibility and scalability to meet seasonal needs.

DOCOMO aims to migrate the final operation testing environment, which is currently in an on-premises location, to the cloud, including Oracle Cloud, to further improve testing efficiency and application quality with flexible development and testing environments in the near future.

Oracle offers integrated suites of applications plus secure, autonomous infrastructure in the Oracle Cloud.

Oracle Cloud And AI Boss Don Johnson Stepped Down, Leaked Email Shows

Oracle’s cloud and AI leader Don Johnson has stepped down from the Platform & AI Services organization he formed about a year ago, leaving Oracle Cloud Infrastructure boss Clay Magouyrk solely in charge of the company’s cloud business, Insider has learned.

Johnson – the former Oracle Cloud Infrastructure boss once named by founder and CTO Larry Ellison himself as a potential contender for co-CEO – will now serve as an adviser to Ellison on new healthcare cloud initiatives, according to the email.

It’s not the first time Johnson has stepped back from a role leading OCI. In June 2020, Johnson told employees that he was stepping down from direct leadership of the cloud unit to pursue new projects within Oracle, tapping Magouyrk to replace him.

Johnson returned in December 2020 to start the new cloud and artificial-intelligence organization that he described in an email to employees as “An extension of OCI, not a division of it.” Oracle’s internal organizational chart, viewed by Insider last year, showed Johnson oversaw about one-third of OCI employees.

The move leaves Magouyrk in charge of Oracle’s cloud business, which has set its sights on overtaking the reigning Amazon Web Services as the biggest platform in the industry – an ambitious goal, given that Oracle Cloud is widely considered a distant last-place in the market behind Amazon, Microsoft, and Google.

Current and former Oracle employees told Insider last year that there’s a “Culture of fear” at the cloud unit under Magouyrk.

While Johnson’s email said that he plans to advise Ellison on healthcare initiatives, and suggests he may pitch in on Oracle projects here and there, he also writes that he intends on “Stepping away from the computer screen” as much as possible and taking less of a hands-on role.

DOCOMO Adopts Oracle Cloud Infrastructure For ALADIN

NTT DOCOMO, the largest mobile operator in Japan, has adopted Oracle Cloud Infrastructure to build its new development environment for ALADIN, one of the largest customer information management systems in the world.

DOCOMO has moved its on-premises Oracle Database for database training to Oracle Database Cloud Service on OCI. ALADIN supports DOCOMO’s more than 83 million subscriber base, handling all customer-related operations, such as membership and transactional data, credit checks, contract data, and assignment of telephone numbers.

To meet this business expansion and enable faster delivery of better services, DOCOMO is modernizing the ALADIN development environment by moving it to the cloud.

As part of the cloud migration, DOCOMO has also moved its on-premises Oracle Database environment to Oracle Database Cloud Service on OCI. This environment is used by database administrators from dedicated devices to verify and train database recovery procedures and conduct training, including the reproduction of failure conditions in an environment similar to the commercial environment.

With the move to Oracle Database Cloud Service, DOCOMO can enjoy Oracle’s pay-as-you-go service and provide database administrators with the flexibility and scalability to meet seasonal needs.

DOCOMO aims to migrate the final operation testing environment, which is currently in an on-premises location, to the cloud, including Oracle Cloud, to further improve testing efficiency and application quality with flexible development and testing environments in the near future.

Toshimitsu Misawa, member of the board, corporate executive officer and president of Oracle Corporation JapanOracle recently launched Oracle Cloud for Telcos which enables telcos to build new applications or modernize existing workloads on OCI. OCI is gaining a strong reputation for enabling business evolution by providing the extensive developer-friendly services needed to help organizations build, deploy and manage the next generation of applications, and leverage game-changing technologies like artificial intelligence and machine learning.

Oracle Cloud Application Services Market May See A Big Move

A detailed study accumulated to offer Latest insights about acute features of the Oracle Cloud Application Services market.

Oracle Cloud Application Services Market Study guarantees you to remain / stay advised higher than your competition.

The titled segments and sub-section of the market are illuminated below:In-depth analysis of Oracle Cloud Application Services market segments by Types: SaaS Product, PaaS Product.

Key takeaways from the Oracle Cloud Application Services market report:- Detailed considerate of Oracle Cloud Application Services market-particular drivers, Trends, constraints, Restraints, Opportunities and major micro markets.

Conclusive study about the growth conspiracy of Oracle Cloud Application Services market for forthcoming years.

A comprehensive summary of several area distributions and the summary types of popular products in the Oracle Cloud Application Services Market.

Complete research on the overall development within the Oracle Cloud Application Services Market that helps you elect the product launch and overhaul growths.

ACCELQ To Unveil ACCELQ Live: A Revolutionary Approach To Quality Engineering For Cloud & Enterprise Apps

ACCELQ, the leading AI-powered continuous test automation platform, today announced the introduction of ACCELQ Live, a revolutionary approach to digital assurance for cloud and enterprise apps.

ACCELQ Live is built to support this fast-paced development cycle.

“Cloud-based low-code no-code apps like Salesforce, MS Dynamics, Workday, Oracle, etc., have quickly become an industry standard. But test automation of these apps remains a high-code, high-maintenance activity. The technical complexity of these environments – coupled with multiple, interlaced vendor releases – makes traditional automation impossible to sustain,” said Mahendra Alladi, ACCELQ’s founder and CEO. “ACCELQ Live is a game-changer, making it simple for business users to build and run complex automation tasks in multi-cloud environments. With an innovative next-gen platform backing ACCELQ Live, we have democratized testing of cloud and enterprise apps.”

“ACCELQ Live represents a significant leap forward for no-code test automation, speeding digital assurance by as much as 10x,” said Guljeet Nagpaul, Chief of Product & Strategy for ACCELQ. “A live cloud link automatically updates automation assets and ensures every software release is always ready for deployment. We bring together an enterprise and cloud app ecosystem of software and service vendors on a marketplace powered by the ACCELQ Live platform.”

ACCELQ to Host Digital Assurance in the world of Cloud Apps on April 7.

Attendees can get a first look at ACCELQ Live during the season premiere of the company’s webinar series, Digital Assurance in the World of Cloud Apps, which debuts April 7, featuring Salesforce Test Automation in this series opener.

ACCELQ provides a unified platform for web, mobile, API, database, and packaged apps.

Oracle Cloud

Oracle Cloud is a cloud computing service offered by Oracle Corporation providing servers, storage, network, applications and services through a global network of Oracle Corporation managed data centers.

Oracle’s cloud infrastructure was made generally available on October 20, 2016 under the name “Oracle Bare Metal Cloud Services.” Oracle Bare Metal Cloud Services was rebranded as Oracle Cloud Infrastructure in 2018 and dubbed Oracle’s “Generation 2 Cloud” at Oracle OpenWorld 2018.

They offer services such as data integration platform cloud, data integrator cloud service, GoldenGate cloud service, integration cloud, process cloud service, API platform cloud service, apiary cloud service, and SOA cloud service.

Security: The Oracle Cloud Platform provides identity and security applications for providing secure access and monitoring of hybrid cloud environment and addressing IT governance and compliance requirements.

Oracle provides SaaS applications also known as Oracle Cloud Applications.

Oracle Cloud is available as a public cloud; to select government agencies as an Oracle-managed government cloud in the United States and United Kingdom; and as a “Private cloud” or “Hybrid cloud” as an Oracle-managed database-only service or full-service dedicated region – what Oracle calls “Cloud at Customer.”

Oracle Cloud hosts customer-accessible cloud infrastructure and platform services, as well as end-user accessible software as a service from these cloud regions.

What Is Information Management?

Information, as we know it today, includes both electronic and physical information.

The organizational structure must be capable of managing this information throughout the information lifecycle regardless of source or format for delivery through multiple channels that may include cell phones and web interfaces.

According to Wikipedia, Information management is the collection and management of information from one or more sources and the distribution of that information to one or more audiences.

Management means the organization of and control over the structure, processing, and delivery of information.

Information management environments are comprised of legacy information resident in line of business applications, Enterprise Content Management, Electronic Records Management, Business Process Management, Taxonomy and Metadata, Knowledge Management, Web Content Management, Document Management and Social Media Governance technology solutions and best practices.

Of course, not all information is open to anyone, but in principle, the sharing of information helps the use and exploitation of corporate knowledge.

Information management is a corporate responsibility that needs to be addressed and followed from the uppermost senior levels of management to the front line worker.

What Is Information Management?

The infrastructure used to collect, manage, preserve, store and deliver information.

Design, develop, manage, and use information with insight and innovation.

The iSchool MSIM degree combines the study of management, information and technology concepts in an interdisciplinary approach that will support your career goals.

The iSchool helps you develop a deep understanding of the users of information and the organizational and social goals information management serves.

Compared with traditional MBA or technology degrees, the MSIM approach teaches you to effectively utilize the most valuable assets belonging to any organization: information and people.

At the iSchool, we educate practitioners and create leaders who can address the information challenges that face any organization.

Learn more about our Master of Science in Information Management program.

Information Management

Information management concerns a cycle of organizational activity: the acquisition of information from one or more sources, the custodianship and the distribution of that information to those who need it, and its ultimate disposal through archiving or deletion.

Information management embraces all the generic concepts of management, including the planning, organizing, structuring, processing, controlling, evaluation and reporting of information activities, all of which is needed in order to meet the needs of those with organisational roles or functions that depend on information.

With the proliferation of information technology and the extending reach of information systems in the 1980s and 1990s, information management took on a new form.

The scope of senior management interest in information at British Petroleum extended from the creation of value through improved business processes, based upon the effective management of information, permitting the implementation of appropriate information systems that were operated on IT infrastructure that was outsourced.

At the heart of his view of information management is a portfolio model that takes account of the surging interest in external sources of information and the need to organise un-structured information external so as to make it useful.

In 2004, the management system “Information Management Body of Knowledge” was first published on the World Wide Web and set out to show that the required management competencies to derive real benefits from an investment in information are complex and multi-layered.

Since the emergence and popularisation of the Balanced scorecard there has been huge interest in business performance management but not much serious effort has been made to relate business performance management to the benefits of information technology investments and the introduction of new information systems until the turn of the millennium.

Information Management Best Practices

In the 1970s, information management began to emerge from data management as virtual media began to overtake physical media.

As PCs started to replace mainframes as the primary computing platform in the 80s, and as networked systems came to prominence in the 90s, information management came into its own.

The definition of information management is constantly evolving as the technology, ideas, and business needs change.

Information management also includes data management and its associated activities.

IM is often confused with content management or knowledge management.

Content management deals with data a website uses, and the covers to organize and display the data.

Knowledge management is similar to library science, and deals with information for training and education, as well as knowledge and expertise transfer, and passing on lessons learned.

What Is Information Management? Definition And Benefits

In this article, we explain what information management is, how it differs from data management, its importance in the workplace and how you can create an information management system for your company.

What is information management? Information management is the collection, storage, management and maintenance of data and other types of information.

Information management vs. data management Information management begins with the creation and collection of data that is processed and analyzed into information.

Data management is a subset of information management and relates to the policies, plans and programs that protect and control data and information assets through their life cycles.

Information management and its role in the workplace Information management allows an organization to achieve various goals.

Information management provides a system for protecting proprietary information from intruders, system failures and natural disasters.

Identify information requirements The first step when creating an information management system is to identify information requirements.

What Is Information Management?

Information management is the process of collecting, storing, managing and maintaining information in all its forms.

Information management is a broad term that incorporates policies and procedures for centrally managing and sharing information among different individuals, organizations and/or information systems throughout the information life cycle.

Information management may also be called information asset management.

Information management is generally an enterprise information system concept, where an organization produces, owns and manages a suite of information.

The information can be in the form of physical data, or digital data assets.

Information management deals with the level and control of an organization’s governance over its information assets.

Information management is typically achieved through purpose-built information management systems and by supporting business processes and guidelines.

NTT DOCOMO USA, Inc.

NTT DOCOMO USA is the U.S. subsidiary of NTT DOCOMO, the largest mobile network operator in Japan offering a wide scope of mobile phone-based services.

We are now developing a communications business beginning with mobile solutions in the United States, primarily enterprise-facing solutions.

By utilizing the vast global experience of the NTT Group and collaborating with our partner companies in a variety of different fields, we aim to deliver the highest quality services to our customers.

NTT Docomo

NTT Docomo is a subsidiary of Japan’s incumbent telephone operator, NTT. The majority of NTT Docomo’s shares are owned by NTT. While some NTT shares are publicly traded, control of the company by Japanese interests is guaranteed by the number of shares available to buyers.

NTT Docomo is the creator of W-CDMA technology as well as mobile i-mode service.

On April 19, 2008, it was announced that Ryuji Yamada, the current co-president of NTT Docomo, will be promoted as the president of NTT Docomo in June 2008.

NTT Docomo commercially launched its 5G network on March 25, 2020, the first Japanese operator to do so, and making Japan among the first countries in the world to launch 5G. NTT Docomo was a founding member of the Symbian Foundation.

In December 2006 they acquired Guamcell, the largest phone company in Guam, and changed its name to DOCOMO PACIFIC. Docomo is working on implementing its FeliCa-based payment system, called iD, overseas.

Working closely with NTT Docomo’s business and R&D divisions, Docomo Capital is in charge of NTT Docomo’s venture investments in mobile related start-up companies, mainly in the United States and has committed $100M in capital.

Docomo Digital is the international payments business of NTT DOCOMO. DOCOMO Digital partners with carriers, merchants, OTT services, app stores and payment providers in both developed and emerging markets to facilitate direct carrier billing and other payments such as e-wallets.

Ntt Docomo Stock Forecast, Price & News

NTT DOCOMO, INC., a telecommunications company, provides various mobile services in Japan and internationally.

The company offers iPhone, iPad, smartphone, tablet, and feature phone products and services under the docomo name, as well as d POINT CLUB, a point program.

It also provides technical and operational services to mobile operators and other companies.

The company offers LTE, FOMA, and FOMA high-speed services; docomo Wi-Fi services; VoLTE voice call services; docomo Hikari, an optical Internet service; and docomo Shop services.

Further, it provides optical-fiber broadband, satellite mobile communications, and international services; distributes video, music, and electronic books, etc.

Offers finance/payment services, online shopping service, other life-related services, etc.

The company engages in the mobile device protection service, commissioned development/sale, system maintenance businesses, etc.

NTT DOCOMO Selects Oracle Cloud To Boost Development Capabilities For One Of The World’S Largest Customer Information Management Systems

Japanese mobile operator taps Oracle Cloud Infrastructure to improve service quality and enable faster delivery through automation of operation management utilizing Oracle Container Engines for Kubernetes.

Has adopted Oracle Cloud Infrastructure to build its new development environment for ALADIN, one of the largest customer information management systems in the world.

DOCOMO has moved its on-premises Oracle Database for database training to Oracle Database Cloud Service on OCI. ALADIN supports DOCOMO’s more than 83 million subscriber base, handling all customer-related operations, such as membership and transactional data, credit checks, contract data, and assignment of telephone numbers.

As part of the cloud migration, DOCOMO has also moved its on-premises Oracle Database environment to Oracle Database Cloud Service on OCI. This environment is used by database administrators from dedicated devices to verify and train database recovery procedures and conduct training, including the reproduction of failure conditions in an environment similar to the commercial environment.

With the move to Oracle Database Cloud Service, DOCOMO can enjoy Oracle’s pay-as-you-go service and provide database administrators with the flexibility and scalability to meet seasonal needs.

DOCOMO aims to migrate the final operation testing environment, which is currently in an on-premises location, to the cloud, including Oracle Cloud, to further improve testing efficiency and application quality with flexible development and testing environments in the near future.

Oracle offers integrated suites of applications plus secure, autonomous infrastructure in the Oracle Cloud.

DOCOMO Launches Carbon-Neutrality Initiative

NTT DOCOMO announced that it has launched the CaboneuTM Community website where the general public, opinion leaders, companies and nonprofit organizations can share information on implementing eco-friendly actions in everyday life for increased carbon neutrality.

The initiative is an extension of the Caboneu ecosystem DOCOMO launched last September as part of its commitment to reduce greenhouse gas emissions from its business activities effectively to zero by 2030.

The website includes articles about how people are leading eco-friendly lifestyles, information on related events and initiatives, and a members’ page that can be personalized to the preferences of each registered user.

In a related initiative, DOCOMO will set up a Caboneu booth at one of Japan’s largest environmental events, Earth Day Tokyo 2022, in central Tokyo’s Yoyogi Park on April 16-17.

The booth will promote the Caboneu Community and provide hands-on experiences for participants to learn about the global environment.

Going forward, DOCOMO will continue pursuing sustainable corporate development, aiming to help create a more secure, convenient and prosperous world for all generations.

DOCOMO Launches Carbon-Neutrality Website To Encourage Climate Action, Business News

TOKYO, Apr 5, 2022 – – NTT DOCOMO, INC. announced today that it has launched the Caboneu Community website where the general public, opinion leaders, companies and nonprofit organizations can share information on implementing eco-friendly actions in everyday life for increased carbon neutrality.

The initiative is an extension of the Caboneu ecosystem DOCOMO launched last September as part of its commitment to reduce greenhouse gas emissions from its business activities effectively to zero by 2030.

In a related initiative, DOCOMO will set up a Caboneu booth at one of Japan’s largest environmental events, Earth Day Tokyo 2022, in central Tokyo’s Yoyogi Park on April 16-17.

Going forward, DOCOMO will continue pursuing sustainable corporate development, aiming to help create a more secure, convenient and prosperous world for all generations.

About NTT DOCOMO. NTT DOCOMO, Japan’s leading mobile operator with over 83 million subscriptions, is one of the world’s foremost contributors to 3G, 4G and 5G mobile network technologies.

Beyond core communications services, DOCOMO is challenging new frontiers in collaboration with a growing number of entities, creating exciting and convenient value-added services that change the way people live and work.

Under a medium-term plan toward 2020 and beyond, DOCOMO is pioneering a leading-edge 5G network to facilitate innovative services that will amaze and inspire customers beyond their expectations.

Japan’s telcos, it seems, are on a mission to spread the Open RAN word to the rest of the world: Just as Rakuten Symphony has packaged up Rakuten Mobile’s Open RAN technology to offer it to any other operator that wants to make use of it, so NTT DOCOMO is doing the same based on its Open RAN-based 5G rollout experience and know-how, and has opened a “Shared lab” with remote global access as part of its expanded 5G Open RAN Ecosystem efforts.

NTT DOCOMO unveiled its intentions to be a global Open RAN influencer, and the build a new line of business as a systems integrator and support partners to other operators as a result, in February last year, when it announced its 5G Open RAN Ecosystem and 13 partners – Dell Technologies, Fujitsu, Intel, Mavenir, NEC, NTT DATA, NVIDIA, Qualcomm Technologies, Red Hat, VMware, Wind River and Xilinx.

The network isn’t currently virtualized – DOCOMO is working towards that, explained Sadayuki Abeta, head of the radio access network at DOCOMO during a media briefing on Tuesday – but the network elements from its various suppliers all support O-RAN Alliance interfaces for open interconnectivity between the operator’s three suppliers of centralized and distributed unit equipment – NEC, Fujitsu and one as yet unidentified and soon-to-be-deployed “European” vendor – and a number of radio vendors, including NEC, Fujitsu, Samsung and some “Small” Japanese suppliers.

So it’s early days for the lab and for the international outreach, but DOCOMO already has one OREC customer in the form of major South Korean operator KT Corp., which is working with DOCOMO and Fujitsu to accelerate its Open RAN deployment.

Now DOCOMO has its eyes set further afield: It believes that the UK, where the government has forged an Open RAN-based relationship with its Japanese counterpart and already has NEC involved in Open RAN lab trials, could be fertile ground for its OREC offering, along with many of the smaller mobile network operators around Europe that don’t have the resources to develop their own plans and build their own test labs.

DOCOMO has clearly witnessed the impact that Rakuten Symphony has made in the mobile market and during the recent MWC22, when each day seemed to bring a new development of some sort, and it wants to remind the world that it, too, has invaluable experience to offer to the Open RAN community.

What will be interesting to see is if the number of OREC partners grows in the coming months and if more operators join KT Corp. in working with the DOCOMO ecosystem: It is, after all, still very early days in the eveolution of the Open RAN market.

What Is Drone Delivery And How Does It Work?

The next day, drone technology company Zipline launched a vaccine drone delivery service in Ghana, which can make as many as 600 drone flights to 2,000 healthcare facilities on demand.

If drone delivery is actually, finally almost here, it’s time to take a close look at what this big technological shift would actually, finally mean for the package delivery industry – and what the advantages and disadvantages of drone delivery would mean for your business.

Neighbors may also have privacy concerns as drones fly overhead. How exactly will drone delivery work? Because commercial drone delivery has only just begun, there’s a lot we don’t know about how it will play out.

If drone delivery requires the construction of new warehouses that employees have to drive to, drone delivery could have some secondary emissions impacts.

A commercial delivery drone clocks in between 75 dB and 90 dB. Constant commercial delivery drone noise would exceed FAA recommendations for safe levels of noise pollution.

The few examples of drone delivery that we have also speak to the benefits of drone delivery.

It is possible we’re dramatically overestimating or underestimating how much drone delivery will cost carriers, how quickly and widely it will be adopted, or how big its impact on the delivery market will be.

Delivery Drone

Different postal companies from Australia, Switzerland, Germany, Singapore, the United Kingdom and Ukraine have undertaken various drone trials as they test the feasibility and profitability of unmanned delivery drone services.

In 2019, the FAA began certifying drone delivery companies under conventional charter airline Part 135 rules, with some accommodations for drones.

The concept of drone delivery entered the mainstream with Amazon Prime Air – Amazon.com founder Jeff Bezos’ December 2013 announcement that Amazon was planning rapid delivery of lightweight commercial products using UAVs.

In 2015, an Israeli startup Flytrex partnered with AHA, Iceland’s largest eCommerce website, and together they initiated a drone delivery route which demonstrated reducing delivery time from 30 minutes, to less than 5 minutes.

In March 2016, Flirtey conducted the first fully autonomous FAA approved drone delivery in an urban setting in the U.S. In April 2016, a joint project in Japan involving the central government, Chiba City, research institutions and companies including Rakuten was launched to trial home drone deliveries in an urban area.

Founded in 2014, Drone Delivery Canada has developed a proprietary and patented turnkey drone delivery solution.

Delivery drones need powerful motors to keep both the drone and payload aloft.

What Is Drone Delivery? How They Work, Where Used And Pros & Cons

We’ll also explain how drone delivery systems work and highlight some of the companies that are already taking advantage of this new technology!

Before we dive too deeply into this interesting topic, it is important to answer the question, “How does drone delivery work?” As the name suggests, drone delivery involves the transportation of goods to consumers via the use of unmanned drones.

Once perfected, drone delivery will be a much faster and far more efficient method of delivery, allowing some items to be dropped off within an hour of being purchased.

Drone delivery can be used to improve public perception, access remote areas quickly, save time, and deliver vital medical supplies, among many other advantageous actions.

In order to buy a drone that can perform accurate deliveries, companies will need to fork over about $500 per drone.

While rapid drone delivery services will likely cost more than traditional options, they will also get items to you a lot faster.

While drone delivery certainly has a few disadvantages, the benefits vastly outweigh the drawbacks.

Drones For Deliveries From Medicine To Post, Packages And Pizza

Will the day come, when we look above and see thousands of drones busily zipping along to deliver mail, parcels, medicine, pizza and any other small to medium sized item?

In this post we look at the some of the latest drone delivery success stories, the recent history of drone delivery along with the drones being used.

The Project Wing delivery drones have flown over 70,000 test flights, and more than 3,000 deliveries to doorsteps, driveways and backyards of our customers in Australia.

Going back to July 2015, Swiss Post tested the use of drones for mail delivery as part of a joint venture, which included Swiss WorldCargo and Matternet drone manufacturer.

From 10 December 2018, Swiss post drone delivery service are transporting laboratory samples on behalf of Swiss Post from University Hospital Zurich to the Irchel campus at the University of Zurich.

Compare the impact of an airborne, battery-powered drone delivering your order versus a large truck traveling over the road. There’s obviously an enormous gain when it comes to emissions and drones are energy efficient.

The list of the FAA’s current commercial exemptions also know as FAA 107 Waivers shows a surprisingly high number of businesses are utilizing popular mainstream drones with professional capabilities, such as DJI’s Phantom 4 Pro V2. While these drone cameras do the handiwork for the various industries, they lack the capability to carry packages and that’s where innovation comes in.

Alphabet’S Wing Kicks Off Drone Delivery Service In Dallas On April 7th

Wing, the drone delivery company operated by Google-parent Alphabet, will launch its first commercial service in the US on April 7th. The company’s quadcopters will be available to “Tens of thousands” of homes in the suburban towns of Frisco and Little Elm, both of which are part of the Dallas-Fort Worth metro area, the company said.

Wing’s operations team then pilots the drone remotely to the customer’s homes.

In the US, drone delivery has generally been limited to smaller towns, where land usage is less crowded and complex.

Wing has been able to rack up a series of minor successes, recently completing its 200,000th delivery while operating in three countries: the US, Finland, and Australia.

Wing has been testing its service in the Dallas suburbs since last year, and the decision to launch a commercial service is a sign of the company’s growing confidence in the technology.

“This is an important milestone for Wing and drone delivery in the US,” Wing CEO Adam Woodworth said in a blog post.

Much like sister company Waymo, Wing is focused on incremental improvements before pulling the lever on wide-scale deployment.

The Best 3+ Drones For Delivery: Pros, Cons & Even More

Have you had any idea of delivery drones, unmanned aircraft, flying machines, flying robots, or automation)? If not, you are in the right place.

With a flight time of an astounding 28 minutes, a more extensive range, and more noteworthy speeds, you would now be able to get the best out of your flying aptitudes and the aerial photography abilities of the UAV.The mobile app makes it simpler to control the machine.

The famous Phantom 4 is most likely the best filming UAV available right now, yet the highlights that it offers are incredible even for a couple of other opportunities.

In other words, the UAV would even be fit for taking not only one thing but also more for every run as well as making a couple of conveyances during the same run.

AMAZON PRIME AIR. With their new UAV conveyance system, Amazon will likely utilize drones for conveying packages to their buýe in 30 minutes or less.

DOMINO’S. The all-around well-known Domino’s Pizza, all the more definitely their UK branch, uncovered that they were considering utilizing UAVs for the conveyance of their pizzas.

We, as a whole, trust that it is coming, the day when a flying robot flies up to your home, dispatches your delivery from Amazon, etc.

Buy Industrial Commercial Hexacopter

The commercial hexacopter delivery drones for emergency or commercial delivery purpose.

It’s time to build your delivery drone fleet at affordable prices!

Delivery Drone Specifications We build the powerful hexacopter drone with reasonable production costs and acceptable selling prices.

You will get a series of online training courses after ordered the delivery drone.

Expand applications of the delivering drone by deploy multiple optical mounting systems.

Agricultural Pesticide Spraying SystemHigh efficiency agricultural drone.

Customize the mounting system to deploy the delivery drone in multiple commercial applications.

Symptoms And Causes

Acromegaly is a hormonal disorder that develops when your pituitary gland produces too much growth hormone during adulthood.

If you have signs and symptoms associated with acromegaly, contact your doctor for an exam.

Too much GH leads to too much IGF-1, which can cause acromegaly signs, symptoms and complications.

Most acromegaly cases are caused by a noncancerous tumor of the pituitary gland.

The tumor produces excessive amounts of growth hormone, causing many of the signs and symptoms of acromegaly.

Some of the symptoms of acromegaly, such as headaches and impaired vision, are due to the tumor pressing on nearby brain tissues.

Acromegaly can lead to major health problems.

Acromegaly

Some people with acromegaly may have a genetic condition that can lead tumors to develop in different parts of their bodies.

In more than 9 out of 10 cases, acromegaly is caused by a tumor in the pituitary gland, called a pituitary adenoma.

Rarely, acromegaly is caused by tumors located in the hypothalamus-a small area of the brain near the pituitary gland, pancreas, lungs, or other parts of the chest or abdomen.

If the imaging test doesn’t find a pituitary tumor, your doctor will look for nonpituitary tumors as the cause of your high GH levels.

Removing these nonpituitary tumors also lowers GH levels and improves acromegaly symptoms.

The cure rate right after surgery is about 85 percent for small tumors and 40 to 50 percent for large tumors.

A single dose may not work for very large tumors and tumors located close to nerves that affect vision.

Acromegaly

Acromegaly is rarely due to a tumor in another part of the body.

About 98% of cases of acromegaly are due to the overproduction of growth hormone by a benign tumor of the pituitary gland called an adenoma.

Many pituitary tumors arise from a genetic alteration in a single pituitary cell that leads to increased cell division and tumor formation.

In a few people, acromegaly is caused not by pituitary tumors, but by tumors of the pancreas, lungs, and adrenal glands.

In people with GHRH-producing, non-pituitary tumors, the pituitary still may be enlarged and may be mistaken for a tumor.

It is important that physicians carefully analyze all “Pituitary tumors” removed from people with acromegaly so as to not overlook the possibility that a tumor elsewhere in the body is causing the disorder.

Bromocriptine lowers GH and IGF-1 levels and reduces tumor size in fewer than half of people with acromegaly.

Johns Hopkins Medicine

When your pituitary gland makes too much growth hormone, abnormal growth occurs.

The abnormal growth starts in your hands and feet, as soft tissue begins to swell.

In children, too much growth hormone causes a condition called gigantism.

These are done to check your growth hormone level and levels of other related hormones.

The main goal of treatment is to get your growth hormone levels back to normal.

These are small growths on the lining of your colon.

Know why a new medicine or treatment is prescribed, and how it will help you.

Acromegaly: Causes, Symptoms & Diagnosis

The symptoms of acromegaly can be difficult to detect since they usually develop slowly over time.

According to the National Institutes of Health, more than 95 percent of people with acromegaly have a benign tumor affecting their pituitary.

Many people with acromegaly don’t know they have the condition because the onset of symptoms is usually slow.

Acromegaly is most often diagnosed in middle-aged adults, but the symptoms may appear at any age.

Treat any hormone deficiencies and improve the symptoms of acromegaly.

Surgery to remove the tumor causing excess GH is the first option doctors usually recommend to people with acromegaly.

Coping with the symptoms and treatments of acromegaly can be challenging.

Acromegaly: Causes, Symptoms, Diagnosis & Treatments

A benign tumor that produces too much growth hormone, called an adenoma, is the cause of acromegaly.

Acromegaly affects the body’s bones and tissues and causes them to grow in abnormal ways.

Acromegaly symptoms often start slowly and may be difficult to notice at first.

Symptoms of acromegaly often show up very slowly, over many years.

If these levels are high, your doctor might order a glucose tolerance test to confirm an acromegaly diagnosis.

Surgery: In many cases, surgery greatly improves acromegaly symptoms or corrects the condition entirely.

Outcomes for people with acromegaly depend on how severe the disease is and how effectively therapies treat the symptoms.

Acromegaly

The treatment of acromegaly is directed toward the specific symptoms that are apparent in each individual.

The goals of treatment of acromegaly are to return growth hormone levels to normal, decrease the size of a pituitary adenoma thereby relieving pressure on the surrounding tissue, maintain normal pituitary function and reverse or improve associated symptoms.

Acromegaly is usually treated by surgery, medications and/or radiation therapy.

Acromegaly is usually treated by transsphenoidal surgery; a procedure in which all or part of a pituitary tumor is removed.

The FDA approved Somatuline® Depot Injection for the long-term treatment of individuals with acromegaly who have had inadequate response to or cannot be treated with surgery and/or radiation therapy.

The FDA has approved the orphan drug Somavert® for the treatment of acromegaly in individuals who have had an inadequate response to surgery and/or radiation therapy and/or other medical therapies or for whom these therapies are not appropriate.

Because results are delayed, radiation therapy is rarely used to treat acromegaly without combining it with surgery or drug therapy.

Atomic Layer Deposition

ALD is a special variant of the chemical vapor deposition technique where gaseous reactants are introduced into the reaction chamber for forming the desired material via chemical surface reactions.

Most of the commercial ALD deposition systems are based on using inert carrier gas, e.g. nitrogen, at about 1 mbar.

In MEMS, the interest to ALD is driven by the unique combination of conformal films with relatively low deposition temperatures offering interesting material selection.

ALD can offer significant advantages in MEMS processing compared to traditional film deposition methods.

3.1 Atomic layer depositionALD has the potential to offer true nanoscale-thick surface depositions, which are highly conformal and pinhole free [34-37]. ALD is an ultrathin film deposition technique that is controlled by gas phase and sequential self-limiting chemical reactions of the precursors at the material surface.

ALD offers highly conformal, pinhole free, and angstrom level surface deposition.

At the present time, this is prevented by two major technological limitations: the necessity to work under high vacuum conditions strongly increases the costs related to ALD depositions on “Bulk” samples, while the intrinsic characteristics of the deposition cycle lead to deposition times that are often incompatible with large-scale production, especially for low value-added components.

Atomic Layer Deposition

ALD is considered one deposition method with great potential for producing very thin, conformal films with control of the thickness and composition of the films possible at the atomic level.

ALD has been developed in two independent discoveries under names atomic layer epitaxy and molecular layering.

In plasma-assisted ALD, the high reactivity of the plasma species allows to reduce the deposition temperature without compromising the film quality; also, a wider range of precursors can be used and thus a wider range of materials can be deposited as compared to thermal ALD. [edit].

ALD on particles 25-100 °C for polymer particles, 100-400 °C for metal/alloy particles BN, ZrO2, CNTs, polymer particles Various gases: Fluidized bed reactors are used to allow coating of individual particles Deposition of protective and insulative coatings, optical and mechanical property modification, formation of composite structures, conductive mediums Plasma or radical-enhanced ALD for single element ALD materials 20-800 °C Pure metals, metal nitrides Organometallics, MH2Cl2, tertbutylimidotris(diethylamido)tantalum, bis(ethylcyclopentadienyl)ruthenium), NH3 DRAM structures, MOSFET and semiconductor devices, capacitors Plasma-enhanced ALD of metal oxides and nitrides 20-300 °C Al2O3, SiO2, ZnOx, InOx, HfO2, SiNx, TaNx Similar to thermal ALD [edit].

Deposition of the high-κ oxides Al2O3, ZrO2, and HfO2 has been one of the most widely examined areas of ALD. The motivation for high-κ oxides comes from the problem of high tunneling current through the commonly used SiO2 gate dielectric in MOSFETs when it is downscaled to a thickness of 1.0 nm and below.

The quality of an ALD process can be monitored using several different imaging techniques to make sure that the ALD process is occurring smoothly and producing a conformal layer over a surface.

Its application between the depositions of each layer by ALD provides information on the growth rate and material characteristics of the film.

Argonne National Laboratory

Atomic layer deposition is a thin-film growth technique that offers the unique capability to coat complex, three-dimensional objects with precise, conformal layers.

ALD allows atomic-level control over the thickness and composition of the deposit.

ALD uses alternating, saturating reactions between gaseous precursor molecules and a substrate to deposit films in a layer-by-layer fashion.

By repeating this reaction sequence in an ABAB fashion, films of virtually any thickness-from atomic monolayers to micrometer dimensions-can be deposited with atomic layer precision.

This alternating reaction strategy eliminates the line-of-sight or constant-exposure requirements that limit conventional methods such as physical- or chemical-vapor deposition.

The ALD research program at Argonne National Laboratory is a joint initiative of the Energy Systems and Materials Science and Energy Systems Divisions that combines basic and applied sciences.

This program is expanding ALD into new fields and deposition platforms and developing ALD thin film technologies that address a wide variety of our nation’s energy challenges.

Atomic Layer Deposition

Atomic Layer Deposition typically involves a cycle of 4 steps that is repeated as many times as necessary to achieve the required deposited thickness.

Step 1) Dosing of the substrate with a precursor vapour of TMA, which adsorbs on and reacts with the surface.

Step 2) Purging of all residual precursor and reaction products.

Step 3) Low damage remote plasma exposure to the surface with reactive oxygen radicals which oxidize the surface and remove surface ligands, this reaction is self-limiting due to the limited number of surface ligands.

Step 4) Reaction products are purged from the chamber.

Only step 3 varies between H2O for the thermal process or O2 plasma.

As the ALD process deposits aangstrom thickness per cycle, control over the deposition process is obtained at the atomic scale.

Tech Brief: A Look At Atomic Layer Deposition

Together with its etch counterpart – atomic layer etching – ALD is enabling the use of new materials and three-dimensional designs in advanced chip manufacturing.

Plasma-enhanced CVD uses a plasma to lower the deposition temperature while maintaining good film quality and high deposition rates.

The PECVD process is “Soupy” – precursors, plasma, byproducts, and other molecular fragments and species are all floating around in the chamber, making it difficult to control film deposition to the atomic scale.

First, while deposition is not exactly a single atomic layer per cycle, film thickness is well controlled and excellent uniformity can be achieved across the wafer.

Its many advantages have led ALD to be used in several applications, and here we take a brief look at some of these.

Metal ALD is also used for the word line fill in replacement-gate schemes, which require lateral deposition that completely fills narrow, horizontal features.

Looking ahead, we expect atomic layer processing to play an increasingly important role in advancing semiconductor manufacturing as these and other applications develop.

Azure Web Application Firewall

Azure Web Application Firewall is a cloud-native service that protects web apps from common web-hacking techniques such as SQL injection and security vulnerabilities such as cross-site scripting.

The Azure Web Application Firewall detection engine combined with updated rule sets increases security, reduces false positives, and improves performance.

Easily deploy Azure Web Application Firewall security with no additional software agent required.

Deploy Azure Web Application Firewall in Azure Front Door for advanced security, scalability, and accelerated delivery of apps to global users.

Why trust Azure Web Application Firewall to protect your applications?

Azure Web Application firewall resources and documentation.

Azure Web Application Firewall is a cloud-native service that protects your web applications from bot attacks and common web vulnerabilities such as SQL injection and cross-site scripting.

What Is A Web Application Firewall?

A Web Application Firewall is a security device designed to protect organizations at the application level by filtering, monitoring and analyzing hypertext transfer protocol and hypertext transfer protocol secure traffic between the web application and the internet.

A WAF acts as a reverse proxy, shielding the application from malicious requests before they reach the user or web application.

Put simply, a WAF protects the organization at the application level by analyzing all HTTP/HTTPS communication, whereas the network firewall acts as a barrier that prevents unauthorized access to the network on a whole.

Blocklist Web Application Firewall: A blocklist WAF, or negative security model, protects against known attacks by denying access to traffic.

Allowlist Web Application Firewall: An allowlist WAF, or positive security model, admits only traffic that is on a pre-approved list.

Incorporating a WAF within the cybersecurity strategy is one way that organizations can address attacks aimed at web applications and application programming interfaces.

Falcon Firewall Management is an advanced solution from CrowdStrike that provides simple, centralized firewall management, making it easy to manage and enforce host firewall policies.

What Is A Web Application Firewall?

Protecting web applications and APIs is now a critical component for application security engineers, security architects, and information security professionals.

Once we’ve covered how you can use a WAF solution to protect your applications against vulnerabilities, we’ll look into how you can use this technology to protect your applications moving forward and investigate web application and API security.

Web application firewalls were created and became popular toward the latter part of the 1990s as web applications grew in popularity and became the targets of cyberattackers.

Before we talk about the critical components of an effective web application firewall, let’s consider the different types of threats against your web application.

Agile development processes, continuous integration and deployment, and environments that are constantly changing create new challenges for the traditional WAF. The next generation of web application and API protection is web app and API security.

Some additional features that you should consider when selecting a web application security solution is the ability to screen requests based on place of origin.

Learn more about Palo Alto Networks Web Application and API Security solution, or get a free trial of Prisma Cloud.

Web Application Firewall

AWS WAF is a web application firewall that helps protect your web applications or APIs against common web exploits and bots that may affect availability, compromise security, or consume excessive resources.

AWS WAF gives you control over how traffic reaches your applications by enabling you to create security rules that control bot traffic and block common attack patterns, such as SQL injection or cross-site scripting.

You can also customize rules that filter out specific traffic patterns.

These rules are regularly updated as new issues emerge.

AWS WAF includes a full-featured API that you can use to automate the creation, deployment, and maintenance of security rules.

You can deploy AWS WAF on Amazon CloudFront as part of your CDN solution, the Application Load Balancer that fronts your web servers or origin servers running on EC2, Amazon API Gateway for your REST APIs, or AWS AppSync for your GraphQL APIs.

With AWS WAF, you pay only for what you use and the pricing is based on how many rules you deploy and how many web requests your application receives.

Web Application Firewall

We recently migrated our community to a new web platform and regretably the content for this page needed to be programmatically ported from its previous wiki page.

A ”’web application firewall”’ is an application firewall for HTTP applications.

While proxies generally protect clients, WAFs protect servers.

A WAF is deployed to protect a specific web application or set of web applications.

WAFs may come in the form of an appliance, server plugin, or filter, and may be customized to an application.

The effort to perform this customization can be significant and needs to be maintained as the application is modified.

Wikipedia.org/wiki/Web application firewall.

Web Application Firewall protects the web application by filtering, monitoring, and blocking any malicious HTTP/S traffic that might penetrate the web application.

In simple words, a Web Application Firewall acts as a shield between a web application and the Internet.

Working of Web Application FirewallAccording to the OSI model, WAF is a protocol layer seven defense.

The advantage of WAF is that it functions independently from the application, but yet it can constantly adapt to the application behavior changes.

WAF can be set to various levels of examinations, usually in a range from low to high, which allows the WAF to provide a better level of security.

Types of Web Application Firewall:Network-based WAFs are usually hardware-based.

Policy in Web Application Firewall:The set of rules through which a WAF operates is called a policy.

12 Best Web Application Firewall For 2022 Buyer’S Pros & Cons

Here is our list of the best web application firewalls: AppTrana Managed Web Application Firewall EDITOR’S CHOICE A Fully Managed Web Application Firewall provided by Indusface with bundled application scanner, CDN and managed custom security rules with Zero WAF False-positive assurance backed with SLA and 24×7 support.

Fortinet FortiWeb An edge service bundle that offers a web application firewall, an SSL off-loader, and a load balancer in a cloud service, an appliance, or VM. Imperva Cloud WAF A cloud-based web application firewall with an onsite equivalent appliance called Imperva WAF Gateway.

MS Azure Web Application Firewall A cloud-based WAF that can protect web servers anywhere.

Many web application firewall providers try to capture as much of the market as possible by offering their WAF systems in as many configurations as possible.

Cloudflare WAF. Cloudflare has become very successful at protecting web hosts from DDoS attacks and they extend their protection with a web application firewall.

Proponents of software WAFs argue that you already have sufficient hardware available, you just need to extend the capabilities of your existing equipment in order to get a Web application firewall.

You won’t be committed to directing your URL to provide your WAF. Choosing a web application firewall solution.

Barracuda Networks

March 2022.Key findings on the latest social engineering tactics and the growing complexity of attacksGET THE REPORT. Ransomware protection can be easy as 1-2-3.

Secure your email, web apps, and data with Barracuda.

Barracuda Networks

Barracuda Networks was founded in 2003 by Dean Drako, Michael Perone, and Zach Levow; the company introduced the Barracuda Spam and Virus Firewall in the same year.

In addition to providing samples of prior art in an effort to render Trend Micro’s patent invalid, in July 2008 Barracuda launched a countersuit against Trend Micro claiming Trend Micro violated several antivirus patents Barracuda Networks had acquired from IBM. In December 2008, the company launched the BRBL, its proprietary and dynamic list of known spam servers, for free and public use in blocking spam at the gateway.

In November 2013, Barracuda Networks went public on the New York Stock Exchange under the ticker symbol CUDA. In March 2015, Barracuda Networks expanded its business to North Asia and was distributed by TriTech Distribution Limited in Hong Kong.

Barracuda Sentinel – In June 2017, Barracuda launched an artificial intelligence service to prevent spear phishing and cyber fraud.

In November 2008, Barracuda Networks acquired 3SP, allowing the company to introduce Secure Sockets Layer Virtual Private Network products to allow secure remote access to network file shares, internal Web sites and remote control capabilities for desktops and servers.

In October 2009, Barracuda Networks acquired Purewire Inc, a software as a service company offering cloud based web filtering and security.

In November 2017, Barracuda announced that it was being acquired by private equity investment firm Thoma Bravo, LLC. In January 2018, Barracuda acquired PhishLine.

Barracuda Networks Stock Forecast, Price & News

Barracuda Networks, Inc. designs and delivers security and data protection solutions.

The Company offers cloud-enabled solutions that enable customers to address security threats, manage network performance, and protect and store their data.

Its solutions are designed to manage information technology operations for its customers.

Its data protection solutions include Barracuda Backup, Barracuda Message Archiver and CudaSign.

Its solution suites combine its security and data protection offerings into services designed for cloud platforms and managed services environments.

Its solution suites include Barracuda Essentials for Office 365 and Intronis ECHOplatform.

Barracuda Campus

Watch this short video to find out how Barracuda Campus can help you on your journey.

Follow the links below to get help and stay up to date.

What is Classroom training? Join instructor-led classroom training conducted by Barracuda Networks, Authorized Training Centers, and Training Partners.

Classroom training is offered at various locations around the globe.

What is Distance Learning training? With numerous classes each week, the majority of our courses is available online – instructor-led and conducted by Barracuda Networks, Authorized Training Centers, and Training Partners.

Nasdaq 100 Index Component Weights

There are 102 symbols due to several companies with two share classes.

Google’s parent company Alphabet has Class A and Class C shares in the index.

When companies are removed and added to the index the membership list may temporarily show both the removed company and added company.

TQQQ Vs. QQQ: What’S The Difference?

In particular, TQQQ seeks returns that are 3x that of the QQQ. Among leveraged ETFs, PowerShares, ProShare, UltraPro TQQQ is one of the largest with assets under management of $17.83 billion as of February 2022.

TQQQ carries an expense ratio of 0.95%. Due in part to QQQ’s popularity, issuers of leveraged ETFs tapped traders’ thirst for more exotic ways to play the Nasdaq-100.

TQQQ Pros and Cons While multiple ETFs offer exposure to Nasdaq indexes, the Invesco QQQ is the king of that group.

The $187.3 billion QQQ is over 20 years old and is one of the largest plain-vanilla ETFs in the U.S. QQQ tracks the widely followed Nasdaq-100 Index, a benchmark that holds famed technology and internet stocks such as Apple Inc., Microsoft Corp. and Google parent Alphabet Inc., among others.

The highly-rated, large-cap fund was first established in 1999 and works to return results that follow the Nasdaq 100 index and has a gross expense ratio of 0.20%. QQQ returns quarterly distributions to investors with a distribution yield of just under 0.50%. QQQ checks many of the boxes long-term investors look for in broad market ETFs.

Thus, if the Nasdaq 100 rises 1%, the TQQQ returns +3%; if it falls by 1%, the TQQQ loses 3%. What Companies Are In TQQQ? The TQQQ is a 3x leveraged ETF based on the QQQ. Because it is leveraged, it uses derivatives contracts to amplify its returns based on how the index performs.

Unlike traditional ETFs, leveraged ETFs like TQQQ have a high turnover and utilize derivatives contracts.

Clean Earth Acquisitions Corp’S Quiet Period Will End On April 5th

Clean Earth Acquisitions’ quiet period will end on Tuesday, April 5th. Clean Earth Acquisitions had issued 20,000,000 shares in its public offering on February 24th. The total size of the offering was $200,000,000 based on an initial share price of $10.00.

During Clean Earth Acquisitions’ quiet period, underwriters and any insiders involved in the IPO are prevented from issuing any earnings forecasts or research reports for the company because of SEC regulations.

Following the expiration of the company’s quiet period, it’s expected that the brokerages that served as underwriters on the stock will initiate research coverage on the company.

Clean Earth Acquisitions has a fifty-two week low of $9.98 and a fifty-two week high of $10.06.

Global Bond Sales To Cross $10 Trillion In 2022 -S&P

LONDON – Global sovereign borrowing will reach $10.4 trillion in 2022, nearly a third above the average before the coronavirus pandemic, S&P Global Ratings said in a report.

Despite an economic recovery, borrowing will stay elevated because of high debt rollover requirements and war in Ukraine, the ratings agency said in an annual note.

While 137 countries will borrow an equivalent of $10.4 trillion in 2022, an estimated 30% lower than 2020, the overall figure is one-third higher than average borrowing between 2016 and 2019, S&P said.

Borrowing in the economies of emerging Europe, Middle East and Africa will rise $253 billion to the equivalent of $3.4 trillion by the end of the year, S&P said in an accompanying report on Thursday.

Egypt, which has recently sought IMF assistance, is set to overtake Turkey as the region’s largest issuer of sovereign debt, with $73 billion worth of bond sales, S&P analysts forecast.

Among larger countries globally, Kenya, Egypt and Japan have the biggest share of debt that needs to be rolled over this year, the analysts said, pointing to short-term debt of 26% and 30% of total debt stocks in Egypt and Kenya respectively.

Commercial debt in EMEA emerging markets is set to increase to 37% of GDP from 31% in 2016, boosted by pandemic-related costs, a rise in commercial borrowing in Oman and Saudi Arabia and “Persistently high fiscal deficits” in Egypt and Romania.

Global Bond Sales To Cross $ 10 Trillion In 2022 -S&P By Reuters

LONDON – Global sovereign borrowing will reach $ 10.4 trillion in 2022, nearly a third above average before the pandemic coronavirus, S&P Global will rise $ 253 billion to the equivalent of $ 3.4 trillion by the end of the year, S&P said in an accompanying report on Thursday.

Egypt, which has recently sought IMF assistance, is set to overtake Turkey as the region’s largest issuer of sovereign debt, with $ 73 billion worth of bond sales, S&P analysts forecast.

Among larger countries globally, Kenya, Egypt and Japan have the largest share of debt that needs to be rolled over this year, analysts said, pointing to short-term debt of 26% and 30% of total debt stocks in Egypt and Kenya respectively.

Commercial debt in EMEA emerging markets is set to increase to 37% of GDP from 31% in 2016, boosted by pandemic-related costs, a rise in commercial borrowing in Oman and Saudi Arabia and “Persistently high fiscal deficits” in Egypt and Romania.

Across emerging markets, JPMorgan (NYSE analysts said in a note on Monday, the corporate default rate could reach 8.5% this year, more than double the 3.9% they expected before Russia invaded Ukraine and the highest since the global financial crisis.

Global Bond Sales To Cross $10 Trillion In 2022

LONDON – Global sovereign borrowing will reach $10.4 trillion in 2022, nearly one-third above the average before the coronavirus pandemic, S&P Global Ratings said in a report.

Despite an ongoing economic recovery, borrowing will stay elevated due to high debt rollover requirements and the ongoing war in Ukraine, the ratings agency said in an annual note.

While 137 countries will borrow an equivalent of $10.4 trillion in 2022, an estimated 30% lower than 2020, the overall figure is one-third higher than the average borrowing between 2016 and 2019, S&P said.

“Tightening monetary conditions will push up government funding costs,” S&P analysts said.

“This will pose additional difficulties to sovereigns that have been unable to restart growth, reduce reliance on foreign currency financing, and where interest bills are already critically high on average.”

Voya Global Bond Portfolio

Voya Global Bond PortfolioThe Portfolio seeks to maximize total return through a combination of current income and capital appreciation.

Sean Banai is head of portfolio management for the fixed income platform at Voya Investment Management.

Brian Timberlake is the head of fixed income research at Voya Investment Management, responsible for managing the organization’s global fixed income research analysts as well as the coordination of macroeconomic data across the fixed income platform.

Brian is a named portfolio manager on several global and opportunistic fixed income products.

The Portfolio may use Derivatives, such as options and futures, which can be illiquid, may disproportionately increase losses and have a potentially large impact on Portfolio performance.

The Portfolio is subject to both Credit and Interest Rate Risk.

The Portfolio’s share price and yield will be affected by interest rate movements, with bond prices generally moving in the opposite direction from interest rates.

James Bond Show Coming To Amazon

The world of James Bond is hitting the streaming world a lot sooner than you’d think.

Amazon’s Prime Video has greenlit its first TV show based on the iconic British spy with “007’s Road to a Million,” a Bond-style spin on a race around the world.

The e-commerce giant closed its $8.5 billion deal for MGM last week, with the James Bond franchise believed to be a powerful driving force behind the acquisition.

Production on “007’s Road to a Million” will begin later this year, and the new show will launch on Prime Video in more than 240 countries and territories.

Executive producers include David Glover, CEO of 72 Films, as well as Wilson and Broccoli for EON Productions, and Barry Poznick and Mark Burnett for MGM. The show joins a slate of unscripted U.K. originals on Prime Video, including “Clarkson’s Farm” and “All or Nothing: Tottenham Hotspur.” Other U.K. originals include the dramas “The Rig,” “The Devil’s Hour,” “Jungle,” “Lovestruck High,” “Anasi Boys” and “The Power.” Prime Video’s U.K. team is overseen by Dan Grabiner.

With “007’s Road to a Million,” however, Prime Video clearly has global aspirations for the series despite production originating out of the U.K. 72 Films’ Glover told Variety: “I first had this idea over three years ago. Dan Grabiner and the U.K. Originals team took it to a whole other level. To be working with Michael Wilson and Barbara Broccoli and the Bond franchise is a privilege and a dream come true.”

The Bond-themed Prime Video show comes during a period of transition for the franchise, which wrapped up Daniel Craig’s acclaimed run last year with “No Time to Die.” Broccoli and Wilson must now find a new actor to handle the role and to help continue to find ways to make the womanizing spy relevant in a changed world.

Stocks Close Higher, Bond Yields Rise After Jobs Report

U.S. stocks edged higher Friday, buoyed by a solid employment report that showed the country’s jobless rate returning to prepandemic levels.

All three indexes started the day higher, edged lower in midday trading as yields on government bonds surged, then climbed again to end the day in the green.

The benchmark stocks gauge ended the week up less than 0.1%. In the bond market, the yield on the two-year Treasury note closed above that of the 10-year note for the first time since 2019.

Two-year yields, which are more sensitive to expectations of short-term interest rates, rose to 2.430%. Yields rise as bond prices fall.

Angst about the economic outlook is one reason why stocks have had a rocky start to 2022.

The rally in prices for oil, grains and metals has added to expectations that the Fed will end years of easy monetary policy that propelled stocks higher.

Appeared in the April 2, 2022, print edition as ‘Stocks Close Higher in Wobbly Trading.

Global Bond

A global bond is a bond which is issued in several countries at the same time.

By offering the bond to many investors, a global issuance can reduce borrowing cost.

These bonds are usually issued by large multinational organizations and sovereign entities, both of which regularly carry out large fund-raising exercises.

By issuing global bonds, an issuing entity is able to attract funds from a vast set of investors and reduce its cost of borrowing.

Global bonds are issued in different currencies and distributed in the currency of the country where it is issued.

A global bond issued in the United States will be in US Dollars, while a global bond issued in the Netherlands will be in euros.

Bonds are loaned in terms of years; for example, a three-year US$2 billion global loan will be paid back by the country it is loaned to within three years at face value plus the interest rate.

Insys Therapeutics

In addition to Subsys, Insys Therapeutics marketed Syndros, a synthetic THC product, and was working toward approval of other cannabis derivatives.

In August 2017, Insys Therapeutics was sued by Arizona Attorney General Mark Brnovich for misleading patients and doctors about the dangers of the drug Subsys, and for lying to insurers about the condition of the patients in a bid to get payment for the drug.

Insys Therapeutics issued a response to the Arizona filing on their website, stating, in part, that “[t]he allegations contained in the Arizona Attorney General’s complaint relate to former employees and physicians that are no longer associated with our Company or our speaker bureau.

In October 2017, Insys founder John Kapoor was arrested in Arizona and charged with RICO conspiracy, conspiracy to commit wire fraud, and conspiracy to violate the anti-kickback law related to Insys’ effort to secure prescriptions of Subsys.

In April 2019, Alec Burlakoff, the former vice president of sales for Insys, agreed to pay the State of Arizona $9.5 million in a civil settlement with Attorney General Mark Brnovich for his role in the alleged bribery campaign of doctors to prescribe Insys products to patients.

On May 2, 2019, a federal jury found top executives of Insys Therapeutics guilty of racketeering charges.

In June 2019, Insys Therapeutics agreed to pay $225 million to settle the federal government’s criminal and civil investigations into the company’s marketing practices.

INSYS Therapeutics Stock Forecast, Price & News

Insys Therapeutics, Inc., a specialty pharmaceutical company, focuses on cannabinoids and drug delivery systems that address unmet patient needs.

The company markets SUBSYS, a sublingual fentanyl spray for breakthrough cancer pain in opioid-tolerant adult patients; and SYNDROS, an orally administered liquid formulation of dronabinol for the treatment of chemotherapy-induced nausea and vomiting, and anorexia associated with weight loss in patients with AIDS. It also develops Cannabidiol Oral Solution, a synthetic cannabidiol, for the treatment of rare childhood epilepsy syndromes that include west syndrome and childhood absence epilepsy, as well as glioblastoma multiforme, pontine glioma, and pediatric schizophrenia.

The company develops Buprenorphine Sublingual Spray for acute pain; Epinephrine Nasal Spray for allergic reactions, including anaphylaxis; and Naloxone Nasal Spray for opioid antagonist.

Insys Therapeutics Agrees To Enter Into $225 Million Global Resolution Of Criminal And Civil Investigations

BOSTON – Opioid manufacturer Insys Therapeutics agreed to a global resolution to settle the government’s separate criminal and civil investigations, the Department of Justice announced today.

As part of the criminal resolution, Insys will enter into a deferred prosecution agreement with the government, Insys’s operating subsidiary will plead guilty to five counts of mail fraud, and the company will pay a $2 million fine and $28 million in forfeiture.

As part of the civil resolution, Insys agreed to pay $195 million to settle allegations that it violated the False Claims Act.

As part of the criminal resolution, Insys agreed to a detailed statement of facts outlining its criminal conduct with respect to the illegal marketing of Subsys.

According to the terms of the criminal resolution, Insys will pay a criminal fine of $2 million and forfeiture of $28 million.

Instead, OIG will provide such a release only after Insys satisfies its obligations under the CIA. “This criminal resolution today with Insys, coupled with the convictions of the 8 executives, shows this Office’s resolve to hold both corporations and individuals accountable for their crimes,” said United States Attorney for the District of Massachusetts Andrew E. Lelling.

“For years, Insys engaged in prolonged, illegal conduct that prioritized its profits over the health of the thousands of patients who relied on it. Today, the company is being held responsible for that and for its role in fueling the opioid epidemic. This global resolution is the culmination of years of work by prosecutors and agents, and these successful prosecutions and civil enforcement efforts should be a model for confronting corporate criminal activity.”

Insys Therapeutics Founder John Kapoor To Serve 66 Months In Prison For Opioid Scheme

BOSTON – John Kapoor, the billionaire founder of the pharmaceutical company Insys Therapeutics, will spend 5-and-a-half years in prison for orchestrating a scheme of bribes and kickbacks to physicians who prescribed large amounts of a fentanyl spray to patients who didn’t need the painkiller.

Kapoor’s 66-month sentence, handed down Thursday in Boston federal court by U.S. District Judge Allison Burroughs, is the lengthiest prison term imposed on seven former Insys executives sentenced in the landmark case over the past two weeks.

Assistant U.S. Attorney Nathaniel Yeager, who sought 15 years in prison, called Kapoor – former chairman of the company’s board – the “Linchpin” of the criminal scheme and the only defendant who could not have been replaced by another conspirator.

U.S. Attorney Andrew Lelling, addressing reporters outside, said the sentences of Kapoor and other Insys executives were not just aimed at punishing the defendants but were intended to deter others from committing the same acts.

A federal jury in May convicted Kapoor and four other Insys executives on racketeering charges, marking the first-ever conviction of a drug company CEO in the federal government’s fight to combat the opioid crisis.

More:Insys Therapeutics CEO John Kapoor, 4 other execs found guilty in fentanyl bribery case.

The prison sentences for Kapoor and the company executives come as other cases stemming from a surge in opioid use and overdose deaths are being prosecuted nationally.

How Insys Therapeutics Bribed Doctors And Made Millions

Skip to Main ContentFunding for FRONTLINE is provided through the support of PBS viewers and by the Corporation for Public Broadcasting.

Major funding for FRONTLINE is provided by the Ford Foundation.

Funding for FRONTLINE is provided through the support of PBS viewers and by the Corporation for Public Broadcasting.

Additional funding is provided by the Abrams Foundation; the John D. and Catherine T. MacArthur Foundation; Park Foundation; and the FRONTLINE Journalism Fund with major support from Jon and Jo Ann Hagler on behalf of the Jon L. Hagler Foundation, and additional support from Koo and Patricia Yuen.

The founder of an Arizona pharmaceutical company was ordered to spend five and half years in prison Thursday for orchestrating a bribery and kickback scheme prosecutors said helped fuel the opioid crisis.

John Kapoor, 76, the former chairman of Insys Therapeutics, was sentenced in Boston’s federal court after a jury found him guilty of racketeering conspiracy last May. The 10-week trial revealed sensational details about the company’s marketing tactics, including testimony that a sales executive once gave a lap dance to a doctor the company was wooing.

In recent court documents, prosecutors said Kapoor personally approved bribes for doctors who abusively prescribed opioids and also approved financial incentives for sales reps to make sure doctors prescribed the highest doses of the drug.

Kapoor’s lawyers argue the bribery scheme was concocted by other executives at the company.

At least two others have since faced criminal charges, but prominent companies including Purdue Pharma, the maker of OxyContin, have only faced suits that carry no threat of prison time.

The company has since filed for bankruptcy protection, and it’s not clear whether the company will fully pay what’s owed.

The company has been approved to sell off Subsys and its other drugs for about $30 million, but it maintains its assets, all told, are worth only $175 million.

Insys Therapeutics Founder Accused Of Bribing Doctors To Prescribe Opioids

Insys Therapeutics founder accused of bribing doctors to prescribe opioids – CBS News.

Get browser notifications for breaking news, live events, and exclusive reporting.

Arafura Resources Stock Forecast, Price & News

Arafura Resources Limited explores and develops mineral properties in Australia.

The company explores for rare earth deposits, as well as tungsten, copper, and vanadium deposits.

Its principal project is the Nolans project, a rare earths-phosphate-uranium-thorium deposit that supplies neodymium and praseodymium products located in Northern Territory, Australia.

The company also engages in mining and associated infrastructure, and social and environmental feasibility evaluations.

Arafura Resources Limited was incorporated in 1997 and is based in Perth, Australia.

December 2012.Sirius has high hopes for NovaSandfire Resources broke all sorts of records when it brought its Degrussa copper-gold mine in Western Australia into production in February.

Now Sirius Resources is setting its sights on emulating those feats.

October 2011.Companies briefsItaly’s Eni has started production from the $US1 billion Kitan oil project in the Timor Sea, with production expected to peak at 40,000 barrels per day.

The field, in which Inpex and Talisman Resources have stakes, lies in the Joint Petroleum Development Area, jointly managed by East Timor and Australia.

September 2011.Lynas sinks further amid market woesLynas shares have now tanked by 31 per cent this week amid a surge in negative sentiment against the rare earths sector and concerns around increased operating costs as the miner waits on a pre-operating licence from Malaysia before it can start producing rare earths.

August 2011.ThyssenKrupp comes to Arafura’s rescueArafura Resources has found a friend to help finance its $1 billion Nolans rare earths project in the Northern Territory in German industrial giant ThyssenKrupp.

Shares, Dividends & News

Please untick this box when using a public or shared device.

We have sent a one-time code via SMS/text to your registered mobile phone.

If you can’t generate a code, you may request to have one sent to your registered mobile phone & email.

If you didn’t receive a code via SMS/text to you mobile phone, you may request a new code.

Updating information Please wait …. Your membership to InvestSMART Group recently failed to renew.

Please make sure your payment details are up to date to continue your membership.

Please click on the ACTIVATE button to activate your Eureka Report 15-day free trial Please click on the ACTIVATE button to activate your Intelligent Investor 15-day free trial Please click on the ACTIVATE button to finalise your membership.

Arafura Resources has a shovel-ready rare earths deposit in the Northern Territory it says could supply over 5 per cent of the world’s insatiable demand for the all-important rare earth elements.

The company’s Nolans rare earth project is fully approved and houses a massive 29.5 million tonnes reserve at 2.9 per cent total rare earth oxides with excellent infrastructure nearby and a supply agreement with Korea already locked away.

The Nolans project sits 130 kilometres north of Alice Springs in Australia’s Northern Territory and comprises a shovel-ready neodymium and praseodymium, or “NdPr” rare earths project.

The agreement will facilitate the supply of rare earths to the Korean market – one of the key global demand centres for rare earths.

The cooperation between Arafura and KOMIR aims to kickstart a range of initiatives that will support growing demand out of Korean for access to rare earth products from the Nolans project.

Arafura does not have any intentions of being a small-time player in the rare earth production game with the company saying current internal forecasting expects the company to produce in the realm of 5-10 per cent of global demand for neodymium and praseodymium.

With offtake agreements already in place, the stars appear to be aligning for Arafura as it looks to turn the Northern Territory into a global breadbasket for heavy rare earths.

Arafura Resources

Arafura Resources Limited is an Australian mineral exploration company focusing on rare earth elements.

It is headquartered in Perth, Western Australia and was listed on the Australian Stock Exchange in 2003.

The company’s flagship project is the Nolans Rare Earths Project, located in Australia’s Northern Territory.

The company had plans to develop extensive processing plant infrastructure at False Bay near Whyalla in South Australia, but abandoned these in April 2013 in favour of processing the ore closer to the proposed mine site.

Documentation for the processing plant proposal was referred for Federal environmental approval under the EPBC Act, triggering a Controlled Action determination in 2011.

Once developed, the Nolans Rare Earth Project will also produce uranium as a secondary product.

Wikipedia

Nichia Corporation is a Japanese chemical engineering and manufacturing company headquartered in Anan, Japan with global subsidiaries.

The Nichia Corporation comprises two divisions – Division 1, responsible for phosphors and other chemicals, and Division 2, responsible for LEDs.

Nichia is the world’s largest supplier of LEDs.

In 1971, Nichia began production of phosphors for color TVs. In 1977, Nichia began the production of tri-color phosphors for fluorescent lamps.

Nichia supports financially a Polish company Ammono, which is the current world leader in bulk Gallium Nitride manufacturing of 2-inch diameter high quality bulk c-plane GaN substrates as well as non-polar M-plane, A-plane and semi-polar GaN wafer.

Nichia funds a joint research project with Ammono to develop ammonothermal gallium nitride growth, and in return Nichia took a stake in Ammono’s intellectual property, as well as access to the crystals that were made.

In January 2006, Nichia launched a lawsuit against rival LED manufacturer Seoul Semiconductor Co., Ltd., alleging design patent infringement.

Nichia Corporation Becomes First To License TriGain® Technology From GE Current, A Daintree Company

Nichia Corporation can now use industry leading TriGain® technology for superior color rendering and efficiency across its LED chip portfolio for use in general illumination applications.

CLEVELAND, November 19, 2020 – Today it was announced that Nichia Corporation will become the first to license TriGain® technology from GE Current, a Daintree company and deploy it into their LED chip portfolio for lighting applications globally.

Nichia has been a worldwide leader in phosphors since the 1960s, including a longstanding relationship with GE also dating back to the ’60s. Nichia’s phosphor expertise, coupled with its invention of the high brightness blue LED and white LED, has helped shape Nichia’s current status as the world’s largest and highest quality LED manufacturer.

Nichia began working with Current on general illumination PFS in 2011 and has been Current’s supplier of this groundbreaking technology since its launch in 2015.

“We are thrilled that Nichia, who has been a long-time strategic partner of ours, will be the first to license our TriGain technology,” said Melissa Wesorick, Chief Marketing Officer at Current.

“The move will bring TriGain® technology to more corners of the market and enable improved commercial lighting products.” “For several years Nichia has put an increased effort into overall quality of light. The market is now demanding more from SSL, beyond simply LPW or CRI alone. We are very excited to have the license to supply PFS LEDs to the global general illumination market. This technology will help us improve overall quality of light by delivering a high color preference without sacrificing efficiency,” said Hideki Kaneguchi, Executive General Manager of Nichia’s Lighting business.

Nichia later developed and commercialized the first high brightness blue LED in 1993 and the first white LED in 1996.

Fiber Cement Siding: Cement Board Lap Siding, Exterior Home Siding & Architectural Wall Panels

Moisture Management Protect your walls from rain and extreme weather elements with our built-in AAMA approved rainscreen.

Performance Engineered Enjoy the look you love for years to come with durable construction that’s resistant to warping, rotting and pests.

Performance Engineering A built-in, meticulously engineered moisture management system allows air and moisture to exit, reducing the risk of mold and water damage to buildings.

Advanced Installation Our clip installation system reduces construction time and minimizes mistakes thanks to our innovative Ultimate Starter Track and Ultimate Clip system.

Low-maintenance Design Resistant to rotting, warping and falling victim to pests, helps bring your vision to life and ensures it looks great for years to come.

This website uses cookies for analytics, personalised content and ads.

By continuing to browse this site you agree to this use.

NICHIHA CORPORATION

EASY INSTALL Time-saving clip installation system that reduces construction time and minimizes mistakes.

DESIGN FLEXIBILITY With our array of textures,finishes and colors, designs are only limited by your imagination.

TECHNOLOGY. Behind our wall panels is some serious technology.

Installation is quick and easy and never requires speciality subcontractors.

DRAINED AND BACK-VENTILATED RAINSCREEN. design allows water to escape and air to circulate, reducing the risk of mold and water damage inside the building.

Have a question? ARCHITECTURE. Explore the latest style andtrends in modern design.

SUPPORT. Our installation videos provide best practices and guidance for install success.

Wikipedia

Lumileds is a lighting company that develops, manufactures, and distributes LEDs, light bulbs, and related products for automotive lighting, general lighting, and specialty lighting.

Upon Philips’ acquisition in 2005, Lumileds became a business unit within Philips Lighting and became known as Philips Lumileds Lighting Company.

In March 2015, Lumileds parent company Philips agreed to sell an 80.1 percent stake in the business to the investment fund, Go Scale.

In December 2016, Philips announced that it has signed an agreement to sell an 80.1% interest in Lumileds to certain funds managed by affiliates of Apollo Global Management.

Philips retains the remaining 19.9% interest in Lumileds.

In architectural lighting they released the Luxeon C in 2015, a family of high-power LED light sources capable of delivering multiple colors from a single focal length.

In September, 2009, Philips Lumileds signed an agreement to license AlInGaP technology to Epistar.

Philips Lumileds Lighting Company Llc Average Salaries

Leotek Electronics USA LLC – San Jose , CA. The company manufactures innovative LED lighting products for applications encompassing traffic and … Leotek Electronics USA LLC has work environment that promotes diversity, equal opportunity …. ZipRecruiter – 14 days ago.

Kane Partners LLC – San Francisco , CA. … lighting, commercial repair, commercial Company Description Kane Partners LLC is a Philadelphia based full service staffing firm, your HR Solution concentrating on technology clients, especially …. ZipRecruiter – 24 days ago.

Advanced Systems Group, LLC – Mountain View , CA. … including lighting, sound, video, and any special needs to ensure performance success … Possesses a strong concern for the needs of their colleagues, clients, and company mission.

Leotek Electronics USA LLC – San Jose , CA. The company manufactures innovative LED lighting products for applications encompassing traffic and … Leotek Electronics USA LLC has work environment that promotes diversity, equal opportunity …. LinkedIn – 1 month ago.

Advanced Systems Group, LLC – San Francisco , CA. Advanced Systems Group, LLC offers a wide range of technical and creative services for media and … DMX Lighting control systems * SBE/SMPTE membership/certification preferred * ISF/color and sound …. LinkedIn – 1 month ago.

Leotek Electronics USA LLC – San Jose , CA. The company manufactures innovative LED lighting products for applications encompassing traffic and … Travel : None Leotek Electronics USA LLC has work environment that promotes diversity, equal …. LinkedIn – 1 month ago.

In support of EPA’s efforts to promote cost-effective high quality efficient lighting products, Philips Lumileds is pleased to enter these comments regarding elements of Draft 2 of the Lamps V1.0 specification pertaining to LED emitter-level performance.

As noted in our comments regarding Draft 1, the proposals to tighten performance requirements for initial color consistency and color maintenance are laudable but would have the unintended effect of increasing the cost of ENERGY STAR certified LED lamps.

The proposed reduction of minimum solid state lifetime requirements from 25,000 to 10,000 hours, while also well intentioned, would result in initial color consistency and color maintenance degradation running counter to EPA’s stated goals for these parameters.

For these reasons Philips Lumileds is pleased to see these requirements reverted in Draft 2 to the values presently required by the Integral LED Lamps specification.

We do note that the proposed passing test requirement for color consistency allows for no units outside of a 7-step ANSI quadrangle, whereas one unit was previously permitted.

Lamp manufacturers typically require a higher level of performance at a component level in order to achieve the target system performance.

Regarding the color angular uniformity limit of 0.004 on the CIE 1976 diagram, Philips Lumileds sees an inconsistency in proposing an increase from the present requirement while also questioning the reliability of existing infrastructure to evaluate compliance with the more stringent requirement.

LED & Conventional Lighting Solutions

Philips is the leading global brand in professional lighting.

We provide high-quality energy efficient lighting products, systems and services.

All relevant information for Installers about energy saving CoreLine LED luminaires, retrofit LED lamps and LEDtubes and conventional lighting.

Become a Philips partner today and gain access to a wide range of products, systems and innovative solutions that your customers will love.

Lighting Academy offers a comprehensive range of educational resources to advance your lighting knowledge.

The educational lighting materials are provided by world-class lighting experts and professionals.

J. B. Hunt

J.B. Hunt Transport Services, Inc. is an American transportation and logistics company based in Lowell, Arkansas.

By 1983, J.B. Hunt had grown into the 80th largest trucking firm in the U.S. and earned $623.47 million in revenue.

J.B. Hunt primarily operates large semi-trailer trucks and provides transportation services throughout the continental U.S., Canada and Mexico.

The company currently employs over 24,000 and operates more than 12,000 trucks.

By 1983, J.B. Hunt became a publicly held company and has grown into the 3rd largest trucking firm in the U.S. In 1989, J.B. Hunt Transport began partnering with railroads to offer intermodal service.

J.B. Hunt also reserved several Tesla electric trucks and added the first-ever, all-electric box trucks to its fleet.

J.B. Hunt has implemented hair testing for all pre-employment tests since May 2006, in addition to Federal Motor Carrier Safety Administration mandated urine testing.

J.B. Hunt CEO Earns Nearly 3% Raise In 2021; Company Announces Carbon Cut Effort

John Roberts III, president and CEO of Lowell-based carrier J.B. Hunt Transport Services Inc., received a 2.7% salary increase and total compensation of $8.8 million in 2021, according to the company’s proxy statement.

Following are the company’s shareholders that own more than 5% of its stock: Johnelle Hunt of Rogers owns 17.4%, The Vanguard Group of Malvern, Pa., owns 9.2%, T. Rowe Price Associates Inc. of Baltimore owns 7.8%, and BlackRock Inc. of New York owns 5.6%. CARBON FOOTPRINT PROGRAMAccording to a Monday news release, J.B. Hunt has launched a program allowing customers to acquire carbon offset credits equivalent to the emissions created by their shipments.

J.B. Hunt will work with third-party organizations and provide participants with data showing the amount of carbon offsets needed to achieve a carbon-neutral shipment and earn carbon credits supporting the project the customer selects.

Customers can choose which transportation routes are part of the program or J.B. Hunt can provide recommendations based on a carbon footprint evaluation.

The carbon offset projects available through the program are verified and registered with organizations such as the American Carbon Registry, Verra, Gold Standard and Climate Action Reserve to confirm that emission reduction and removal were successful and the intended environmental benefits were achieved, according to the release.

J.B. Hunt avoided nearly 4.3 million empty miles in 2020 by using its technology platform J.B. Hunt 360 to secure backhaul freight, the release shows.

The company also noted that converting an over-the-road shipment to intermodal reduces the shipment’s carbon footprint by an average of 60%. Recently, the company also announced it would expand its intermodal fleet up to 150,000 containers in the next three to five years as part of a joint initiative with BNSF Railway Co. Shares of J.B. Hunt were trading Monday at $176.84, down $4.67 or 2.57%. In the past 52 weeks, the stock has ranged between $155.11 and $218.18.

TheTrucker.Com

J.B. Hunt offers a variety of programs designed to accommodate all drivers, including employees, owner-operators and students.

As North America’s leading trucking company with almost 60 years of transportation logistics experience, J.B. Hunt understands the way of the road and helps drivers transform their driving jobs into rewarding, stable careers.

90% of J.B. Hunt’s driving positions are local or regional, allowing drivers to be home every week, if not every day.

With jobs in dedicated, intermodal, truckload and final mile divisions available all over the country, the J.B. Hunt team is adaptable to the changes in its drivers’ lives, wherever those changes may lead. Employee Driver Benefits.

Pay methods vary by operating group and job type, but drivers’ paychecks are a guaranteed delivery.

Becoming a commercial truck driver is a rewarding career that offers stability, strong pay, benefits and more.

In addition to local, regional and over-the-road driving jobs, J.B. Hunt offers delivery driving jobs that do not require a CDL. The company does not currently provide training; a minimum of three months experience is required.

J.B. Hunt Transport Services Number Of Employees, Statistics, Demographics, And Facts

Using a database of 30 million profiles, Zippia estimates demographics and statistics for J.B. Hunt Transport Services.

17% of J.B. Hunt Transport Services employees are women, while 80% are men.

The most common ethnicity at J.B. Hunt Transport Services is White, followed by Hispanic or Latino and Black or African American.

J.B. Hunt Transport Services employees are most likely to be members of the Republican Party.

On average, employees at J.B. Hunt Transport Services stay with the company for 3.5 years.

The average employee at J.B. Hunt Transport Services makes $56,707 per year.

What is the average age of employees at J.B. Hunt Transport Services?Less than 18 years.

Attractive Valuation And Better Prospects Make J.B. Hunt Stock An Interesting Pick

We think that J.B. Hunt Transport Services stock currently is a better pick compared to its peer Old Dominion Freight Line stock, given J.B. Hunt’s better prospects and comparatively lower valuation.

If we look at stock returns, Old Dominion’s 23% growth is better than the 18% returns for J.B. Hunt over the last twelve months.

We compare a slew of factors such as historical revenue growth, returns, and valuation multiple in an interactive dashboard analysis of Old Dominion Freight Line vs. J.B. Hunt Transport Services: Which Stock Is A Better Bet? Parts of the analysis are summarized below.

Old Dominion’s operating margin of 19.4% over the last twelve months is much better than 9.o% for J.B. Hunt.

Looking at financial risk, Old Dominion is better placed over J.B. Hunt.

J.B. Hunt has seen better revenue growth over recent years, and it is trading at a relatively lower valuation.

The table below summarizes our revenue and return expectation for Old Dominion and J.B. Hunt over the next three years and points to an expected return of 23% for JBHT stock over this period vs. 13% expected return for ODFL stock, implying that investors are better off buying JBHT over ODFL, based on Trefis Machine Learning analysis – Old Dominion Freight Line vs. J.B. Hunt Transport Services – which also provides more details on how we arrive at these numbers.

J.B. Hunt Clean Transport Program Focuses On Carbon Offsets

Supply chain service provider J.B. Hunt Transport Services Inc. launched a clean transport program Monday, giving intermodal customers the option to purchase carbon credits that offset greenhouse gas emissions from their shipments.

Based on lane-specific activity evaluated by third parties each quarter, J.B. Hunt’s clean transport program will help customers see how many offsets they would need to purchase to make each shipment carbon-neutral.

“J.B. Hunt is committed to leading the industry toward a low-carbon future,” Craig Harper, chief sustainability officer and executive vice president at J.B. Hunt, said in a release.

“Many of our customers are working towards short- and long-term sustainability goals, and Clean Transport will serve as a great extension of the efforts they’re already taking to reduce the carbon footprint of their supply chain.”

The Lowell, Arkansas-based company plans to extend its clean transport program to more customers after the initial rollout to only intermodal customers.

Read: J.B. Hunt to expand intermodal container fleet by 40%. J.B. Hunt estimates that switching freight from over-the-road transport to intermodal reduces a shipment’s emissions by 60%. “Modal switching is a huge, near-term opportunity to reduce freight emissions. Everywhere possible, it should be on the table. However, for a variety of reasons, intermodal shipping is not always the leading alternative,” said Tyler Cole, director of carbon intelligence at FreightWaves.

“Until we have a higher cost on emissions or competitive, low-carbon alternatives to fossil fuels, firms can choose to offset their residual emissions. I’m glad to see J.B. Hunt offering such a service to their customers. I’m hopeful it will provide environmentally conscious customers with another way to credibly impact their cargo carbon footprint,” Cole said.

J.B. Hunt Launches Clean Transport Program

April 4, 2022 1:19 PM, EDT. J.B. Hunt Transport Services Inc. launched a program April 4 to help customers offset the carbon footprint of their supply chain.

Clean Transport will allow customers to acquire carbon offset credits equivalent to the emissions created by their shipments.

“J.B. Hunt is committed to leading the industry toward a low-carbon future,” said Craig Harper, chief sustainability officer and executive vice president at J.B. Hunt.

“Many of our customers are working toward short- and long-term sustainability goals, and Clean Transport will serve as a great extension of the efforts they’re already taking to reduce the carbon footprint of their supply chain.”

As part of our #Sustainability efforts, we offer multiple #Transportation solutions for customers and are excited to announce a new program, CLEAN Transport! Read to learn more about the program and how it helps customers reduce their #CarbonFootprint.

J.B. Hunt is working with third-party organizations to provide program participants with data showing the amount of carbon offsets needed to achieve a carbon-neutral shipment and obtain carbon credits supporting projects selected by the customer.

Clean Transport is currently available for intermodal customers, but it will expand to additional service areas.

Quality Hard Sided Coolers

If you’re looking for a winter road trip destination in Texas, then check out these Texas winter road trip ideas for your next winter vacation.

Texas Road Trips: Austin, San Antonio, and All Points In Between We all know that road trips are just as much about the journey as they are the destination.

So that’s why we’re going to focus, not on Austin and San Antonio, but all the points in between.

After a day of picnicking, road-tripping, or tailgating, it can be tempting to just empty out your cooler and forget about it until your next adventure.

If you can overcome these lizard-brain impulses and take care of your cooler before putting it away, you’ll find it’s surprisingly easy to keep it clean and looking like brand-new.

Bison Coolers Review 2021

What separates Bison coolers from the competition is that you simply get a top-quality, Made within the USA cooler that really performs, Making it the simplest cooler for the cash you’ll get in 2021.

One neat feature that Bison Coolers have is that although the coolers are available in several colours in order that you’ll pick one that speaks to you, the lids of the darker colours are still white.

The Bison coolers may look plain and straightforward, but because of the first Bison latches, the X design on the face, also because the built-in Bison logo on the lid, these coolers look pretty cool, and may easily be recognized.

Just the very fact that Bison coolers don’t have the normal T-latches which most other roto-moulded cooler coolers have makes them quite unique and distinguishes them from the opposite leading US cooler brands.

All Bison cooler coolers are proudly made in America and are backed with an extended 5-year warranty by the Bison Company.

Bison coolers have brought something simple yet effective Coolers within the industry.

With not such a huge variety, Bison coolers manufactured different coolers consistent with different storage sizes but the thing that seems so impressive is that they had used a typical storage capacity consistent with the customer’s need.

Bison Coolers Review: Topcoolers.Reviews

Bison majorly deals in Bison Hard Coolers and some soft-sided coolers.

Let’s get to know what Bison has to offer across Bison Hard Coolers and Bison Soft Coolers.

You can drive a truck over….✅SERIOUSLY PORTABLE: Open, ergonomic grab rails make it easy to carry, tie down, and….✅30 DAY TRIAL & 5-YEAR WARRANTY: All Bison Hard Coolers come with an industry leading….✅MADE IN THE USA: We take pride in the fact that our Hard Cooler line is produced in the…. 61 Reviews.

With more than 7 days in Bison Hard Coolers, the Bison Coolers are sure to keep your beverages cold when you step out of your home on a journey.

With not so much huge variety, Bison coolers manufactured different coolers according to different storage sizes.

Customer’s FAQs How Are Bison Coolers Designed? Bison Coolers are engineered using a technique called rotomolded construction.

For How Long Bison Coolers Can Keep Ice? As claimed by the brand itself, bison coolers can retain ice multiple days that can go higher up to 10 days.

Bison Cooler Review

Bison Coolers are proudly made in the USA and hope that their quality American craftsmanship and straightforward design approach will win people over in what is a very competitive premium cooler industry.

Bison calls their soft-sided coolers “SoftPak Cooler Bags” and has a 12 can and 24 can option available.

Bison Cooler has many of the features that we look for in a tough and long-lasting cooler in both their hard-sided and soft-sided models.

A common question we are asked is what is better? A Bison Cooler or a Yeti Cooler?

Bison SoftPak Cooler Bags are Bison’s contribution to the premium soft-sided cooler market.

These SoftPak Cooler Bags have nearly an inch of insulation which, according to Bison, is twice as thick as the average cooler bag.

Bison SoftPak Cooler Bags are a nice addition to the growing population of premium soft-sided coolers on the market.

Bison Coolers – Tri-State Outdoor Products, LLC

Bison coolers are one of the top rated ice chest coolers on the market today.

Bison carry’s a 5 year warranty on all of their products.

Drip irrigation – also known as low-flow, micro, and trickle irrigation – is the slow, measured application of water through devices called emitters.

What types of landscapes are best suited for drip irrigation? Most of your landscape can be watered with drip irrigation except for turf areas.

What are the components of a drip irrigation system? Controller/ Timer: Controllers or timers are also called irrigation clocks.

A pressure regulator reduces the incoming water pressure which can range from 50 to 75 psi for most water supplies to levels suitable for a drip system.

In drip tape or polyethylene drip lines emitters are located inside the lines spaced at various intervals.

2 The University of Arizona Cooperative Extension Can I design my own drip irrigation system? Yes, designing your own drip system is not difficult to do, but it does require some careful planning.

Drip systems need a pressure reducer and a filter to protect drip emitters from high pressure and clogging.

Drip Irrigation: Drip Irrigation System & Techniques

Drip irrigation is the most efficient water and nutrient delivery system for growing crops.

It delivers water and nutrients directly to the plant’s roots zone, in the right amounts, at the right time, so each plant gets exactly what it needs, when it needs it, to grow optimally.

Thanks to drip irrigation, farmers can produce higher yields while saving on water as well as fertilizers, energy and even crop protection products.

Water and nutrients are delivered across the field in pipes called ‘dripperlines’ featuring smaller units known as ‘drippers’.

Each dripper emits drops containing water and fertilizers, resulting in the uniform application of water and nutrients direct to each plant’s root zone, across an entire field.

Drip Irrigation

Drip irrigation or trickle irrigation is a type of micro-irrigation system that has the potential to save water and nutrients by allowing water to drip slowly to the roots of plants, either from above the soil surface or buried below the surface.

Depending on how well designed, installed, maintained, and operated it is, a drip irrigation system can be more efficient than other types of irrigation systems, such as surface irrigation or sprinkler irrigation.

Modern drip irrigation began its development in Germany in 1860 when researchers began experimenting with subsurface irrigation using clay pipe to create combination irrigation and drainage systems.

Modern drip irrigation has arguably become the world’s most valued innovation in agriculture since the invention in the 1930s of the impact sprinkler, which offered the first practical alternative to surface irrigation.

Because of the way the water is applied in a drip system, traditional surface applications of timed-release fertilizer are sometimes ineffective, so drip systems often mix liquid fertilizer with the irrigation water.

Properly designed, installed, and managed, drip irrigation may help achieve water conservation by reducing evaporation and deep drainage when compared to other types of irrigation such as flood or overhead sprinklers since water can be more precisely applied to the plant roots.

Drip irrigation might be unsatisfactory if herbicides or top dressed fertilizers need sprinkler irrigation for activation.

About Us

In his role as group president, infrastructure, Aaron is responsible for the strategic leadership of the Engineered Support Structures and Utility Support Structures segments.

Aaron joined Valmont in 2011 as the vice president and general manager, international irrigation.

In 2015, he added the responsibilities of global engineering oversight before being named president of utility in 2016.

Aaron started his engineering career in the composites industry in 1999, moving to China in 2002, where he created and led the engineering department at Orbit Irrigation, based in Shanghai.

When Aaron was promoted to general manager in 2007, his duties expanded to include acquisitions and the establishment of the company’s green-field manufacturing sites in Ningbo, China, and Taipei, Taiwan.

Aaron served in that capacity until joining Valmont.

Aaron has earned numerous degrees, including a BA in Mandarin Chinese and a BS in mechanical engineering from the University of Utah, and an MBA from Northwestern University’s Kellogg School of Management.

Valmont Industries, Inc. Stake Lifted By Congress Asset Management Co. MA

Congress Asset Management Co. MA increased its stake in Valmont Industries, Inc. by 20.0% in the 4th quarter, HoldingsChannel reports.

Congress Asset Management Co. MA’s holdings in Valmont Industries were worth $15,199,000 at the end of the most recent reporting period.

Moors & Cabot Inc. bought a new stake in Valmont Industries during the third quarter worth approximately $85,000.

Impax Asset Management Group plc lifted its position in shares of Valmont Industries by 6.7% in the 3rd quarter.

Gamco Investors INC. ET AL lifted its position in shares of Valmont Industries by 43.9% in the 3rd quarter.

Finally, Boston Trust Walden Corp lifted its position in shares of Valmont Industries by 51.9% in the 4th quarter.

Zacks Investment Research upgraded shares of Valmont Industries from a “Hold” rating to a “Buy” rating and set a $235.00 price target for the company in a research report on Wednesday, February 16th. StockNews.com assumed coverage on shares of Valmont Industries in a research report on Thursday.

Home

Valmont® Structures is one of the world’s leading providers of infrastructure solutions.

We achieve it through our commitment to single idea: integrity.

Integrity doesn’t just define the precision of our custom engineered solutions and time-tested manufacturing process.

Integrity also defines how we work with our customers, suppliers and partners across the street and around the world.

Whether it’s lighting, traffic, mass transit, signage, or wireless communication structures, Valmont Structures delivers integrity.

Valmont Industries

Valmont Industries, Inc. is a large, publicly held American manufacturer of Valley center pivot and linear irrigation equipment, windmill support structures, lighting and traffic poles and steel utility poles.

Their corporate office, main plant and aviation department is in Omaha.

Valmont has many worldwide locations including Europe, China and India.

The company name comes from a combination of the names of two nearby towns, Fremont and Valley.

Mogens Bay was appointed Head Chairman and C.E.O. following the retirement of founder Robert B. Daugherty in 2004.

Global Investment Holding Company

As the first of our six guiding principles, innovation is at the heart of Dubai Holding.

We actively seek to grow a sustainable future through our companies’ initiatives, platforms and projects, positioning Dubai at the forefront of innovative thinking.

A first-of-its-kind loyalty programme offering members effortless, instant rewards in the UAE across leading destinations, attractions and much-loved brands.

Dubai Holding Group

Zara, one of the largest international fashion companies belongs to Inditex, one of the world’s largest distribution groups.

Sfera was launched in June 2001 and is owned by Spanish group El Corte Inglés.

Since its inception, Sfera has carved out a successful position in the Spanish market.

Zara Home is the Inditex Group’s chain of shops specializing in home fashion and decoration.

Global Investment Holding Company

As the first of our six guiding principles, innovation is at the heart of Dubai Holding.

We actively seek to grow a sustainable future through our companies’ initiatives, platforms and projects, positioning Dubai at the forefront of innovative thinking.

An exclusive address, overlooking the Burj Al Arab, one of the most luxurious hotels in the world.

Dubai Holding

To help in the development of a sustainable economy, Dubai Holding manages different companies across multiple industries.

Discover more Discover more Discover more Discover more Discover more Discover more.

Dubai Holding

Dubai Holding is Dubai ruler Sheikh Mohammed bin Rashid al-Maktoum’s personal corporate portfolio.

Dubai Holding has over 130 billion in assets in 13 countries as well more than 20,000 employees worldwide.

In 2021, the Pandora Papers leaks revealed that Dubai Holding owned three companies through a secretive offshore system.

2005: du launched in 2005, with the mission to connect people and businesses through mobile, telephone, broadband and IPTV services across the UAE. 2005: Dubai International Academic City opened.

2013: The Dubai Design District was created for the design community, both local and international.

2014: Mall of the World was announced in 2014, to aligned with the Dubai Tourism Vision 2020.

2014: The Innovation Hub was announced in 2014, and will focus on innovation across new media, technology, smart education and sciences coming from Dubai Media City and Dubai Internet City.

Investing In Everyone Future

We invest in companies and initiatives that make a difference.

Our aim is to combine positive impact with positive returns, by championing sustainability projects, and helping to diversify and transform the UAE. Actively pursue a better world for all, through investments that champion sustainability in the industrial, energy and commodities sectors.

By carefully managing investments, we back success stories: the players who are creating a better world and planet, and helping diversify and transform Dubal Holding into a global leader for knowledge, innovation and sustainability.

A better, more sustainable future won’t happen if the world stands still.

It takes boldness and vision to innovate and lead in new approaches, but it also requires prudent and smart investment.

Positive returns for investors, with positive impacts for the world.

Behind this effort lies our contribution to key initiatives such as the Dubai Industrial Strategy 2030 and Dubai Energy Strategy 2050.

Géant Casino

Géant Casino is a hypermarket chain based in Saint-Étienne, France, part of the French retailing giant Groupe Casino.

In Dec 2015, Géant Casino had about 142 hypermarkets all over the world.

Géant Casino is the fifth largest hypermarket chain in the world and the fourth largest in France after Carrefour, E.Leclerc and Auchan.

Fu-Com joined with Groupe Casino to bring the Géant hypermarket brand to the Middle East where Géant opened its first store in Bahrain in May 2001.

In Qatar, Groupe Casino joined with local supermarket chain Al Meera to open a hypermarket in Hyatt Plaza, and to sell Casino products in Al Meera stores.

Lebanon: Géant had one hypermarket in Lebanon which was bought in late 2008 by Sultan Trading Center and replaced by The Sultan Center to be replaced by carrefour in 2017 upon its closure in Lebanon.

Saudi Arabia: Géant operated several hypermarkets in the kingdom until 2009 when it was sold to the rival Hyper Panda by the local franchisee partner of Géant France.

Géant Casino

Bienvenue sur la page officielle des magasins Géant Casino.

Des informations sur les produits, promotions et services des magasins Géant Casino.

RDV jeudi 7 avril 18h pour notre Live Shopping consacré au ménage de printemps sur Casino.

Inscrivez-vous dès maintenant cet événement pour ne pas le rater !.

Hier le 02/04/22 j’ai été contrôlée la sortie des caisses par un agent de sécurité qui a vidé mon chariot de courses.

Bonjour Valérie, merci pour votre message qui nous interpelle.

Pouvez-vous nous transmettre vos coordonnées ainsi que le magasin concerné en privé ? Nous allons les transmettre notre service clients qui vous contactera très rapide.

Canadian Malartic Corporation

The Canadian Malartic Corporation is a mining company that operates the Malartic mine near Malartic, Quebec.

In 2014, Osisko Mining was subject to a hostile takeover bid by Goldcorp but an alternative bid by white knights Yamana Gold and Agnico Eagle Mines Limited was accepted that, in addition to offering a higher price, created the spin-off Osisko Gold Royalties and turned Osisko Mining Corporation into the subsidiary company Canadian Malartic Corporation jointly owned by Yamana Gold and Agnico Eagle.

The company acquired an interest in the Canadian Malartic property in 2004 and after promising feasibility studies the mine was constructed with commercial production achieved in May 2011.is a Canadian company engaged in the exploration and development of several mineral properties in Quebec.

The Canadian Malartic mine is located in Malartic, Quebec, a community about 550 km northwest of Montreal in the administrative region of Abitibi-Témiscamingue.

In November 2004 they acquired the Canadian Malartic property, a former mine that Lac Minerals had operated.

The Canadian Malartic mine was expected to be the biggest gold mine ever in Quebec and one of the biggest gold mines in Canada.

In April 2014, it was revealed in the media that Yamana Gold and Agnico Eagle Mines Limited could acquire Osisko’s flagship Canadian Malartic mine for around $3.5 billion.

Agnico Eagle Mines Limited

Canadian Malartic is one of the world’s largest gold mines.

Following the completion of an internal technical study in late 2020, the Partnership has approved construction directly to the east of the Canadian Malartic/Barnat pit of a new underground mining complex named the Odyssey project, which hosts three main underground mineralized zones: East Gouldie, East Malartic and Odyssey.

The Canadian Malartic property, together with the adjacent Rand Malartic and Midway properties, cover in excess of 25 km along the Cadillac-Larder Lake deformation zone.

Canadian Malartic is a large open-pit operation using large-scale excavators and trucks, on the southern edge of the Town of Malartic.

The primary exploration target at Canadian Malartic from 2019 to the present has been the East Gouldie Zone, which was discovered in late 2018 at underground depths approximately 1.5 kilometres east of the Canadian Malartic/Barnat open pit and south of the East Malartic and Odyssey underground zones.

The East Gouldie, East Malartic and Odyssey mineral resources do not form part of the Canadian Malartic mine’s mineral reserve and mineral resource estimate.

The Company is planning to spend another $3.2 million on 32,000 metres on exploration drilling to test other regional targets at Canadian Malartic, including the Rand Malartic and East Amphi properties.

Construction Of Canadian Malartic Underground Approved,

MONTREAL, Feb. 16, 2021 – Osisko Gold Royalties Ltd is pleased to announce that the Canadian Malartic Partnership, comprising Agnico Eagle Mines Limited and Yamana Gold Inc., have approved construction of the Odyssey underground project at the Canadian Malartic mine.

Osisko also holds a C$0.40/tonne processing royalty on any ore from outside its royalty boundaries processed through the Canadian Malartic mill, potentially adding further regional exploration upside.

Sandeep Singh, President and CEO of Osisko commented, “The construction decision for the Odyssey underground project by Agnico and Yamana secures the Canadian Malartic mine as Osisko’s flagship asset for decades. It is difficult to over emphasize the importance of this catalyst for Osisko as Canadian Malartic will continue to provide sustainable production until at least 2039, with significant upside beyond. We commend the Partnership for the exploration and engineering efforts that have led to this announcement.”

Osisko holds a 5% NSR royalty on East Gouldie, Odyssey South and the western half of East Malartic and a 3% NSR royalty on Odyssey North and the eastern half of East Malartic.

Osisko’s portfolio is anchored by its cornerstone asset, a 5% net smelter return royalty on the Canadian Malartic mine, which is the largest gold mine in Canada.

These forward‐looking statements, may involve, but are not limited to, statements with respect to the timely construction and the expected life of mine production of the Odyssey underground project, and the potential for discovery and further development of additional underground mineral zones; the potential for growth opportunities at Hammond Reef and Upper Beaver properties and the result of any drilling program, future events or future performance, the realization of the anticipated benefits deriving from Osisko’s investments, the general performance of the assets of Osisko, and the results of development exploration and production activities as well as expansions projects relating to the properties in which Osisko holds a royalty, stream or other interest.

For additional information with respect to these and other factors and assumptions underlying the forward‐looking statements made in this press release, see the section entitled “Risk Factors” in the most recent Annual Information Form of Osisko which is filed with the Canadian securities commissions and available electronically under Osisko’s issuer profile on SEDAR at www.

Carbon Capture & Storage HELPING MEET THE UNITED STATES’ NET-ZERO GOALS In response to the world’s climate crisis, the U.S. Department of Energy’s Office of Fossil Energy and Carbon Management is investing in carbon management technologies to help the nation achieve net-zero emissions by 2050 while also minimizing the environmental impacts of fossil fuel generation and use.

One of FECM’s key priority areas is carbon capture and storage.

CCS is a method used to reduce carbon dioxide emissions and can help achieve deep decarbonization in existing power and industrial sectors.

TOTAL U.S. ENERGY CONSUMPTION IN 2020 + COAL + PETROLEUM = NATURAL GAS 79% CCS Is the only process that can deliver deep emissions reductions in hard-to-reduce industrial sectors, such as steel, fertilizer, and cement.

Will help drive the critical energy transition needed to achieve net-zero carbon emissions by 2050.

These projects will advance point-source CCS technologies that can capture at least 95 percent of CO2 emissions generated from natural gas power and industrial facilities that produce commodities, such as cement and steel.

LEARN MORE about FECM’s carbon management efforts by visiting the FECM website and signing up for official news announcements.

Carbon Capture And Storage

Carbon capture and storage is the process of capturing waste carbon dioxide from large point sources, such as fossil fuel power plants.

Transporting it to a storage site, and depositing it where it will not enter the atmosphere, normally an underground geological formation.

The aim is to prevent the release of large quantities of CO2 into the atmosphere.

Center For Science Education

The possibility of capturing carbon dioxide greenhouse gas, an approach known as carbon capture and storage, could help mitigate global warming.

The strategy is to trap carbon dioxide where it is produced at power plants that burn fossil fuels and at factories so that the greenhouse gas isn’t spewed into the air.

The Intergovernmental Panel on Climate Change estimated that catching carbon at a modern conventional power plant could reduce emissions to the atmosphere by approximately 80-90% compared to a plant that doesn’t have the technology to catch carbon.

To adapt power plants to catch carbon dioxide, absorption towers would need to replace smokestacks.

Make carbon easy to catch: Fossil fuels burned in pure oxygen instead of air produce exhaust that is mostly carbon dioxide and water vapor.

Old oil fields can’t fit that much carbon dioxide and once more oil extracted from the oil field is burned, it adds more carbon dioxide into the atmosphere.

A power plant set up with a way to store carbon dioxide in minerals would need 60-180% more energy than a power plant without.

What Is Carbon Capture And Storage?

In recent years, carbon capture and storage has become a major discussion point in climate change conversations.

Carbon capture and storage is the process of capturing and storing carbon dioxide.

Swiss start-up Climeworks AG, has partnered with Icelandic carbon storage firm, Carbfix, to develop the largest carbon capture and storage plant in the world.

For the past several decades, climate strategies have focused on increasing the use of non-carbon producing energy sources and improving the overall energy efficiency of CO2 producing industries and technologies, but carbon capture is becoming an increasingly important complementary strategy to account for where humans will continue to produce carbon dioxide.

Bringing in carbon capture and storage could help expedite progress toward targets as alternative technologies and new behaviors evolve.

CRITICISM. Many climate change advocates, researchers, and strategists argue that carbon capture and storage alone is not a viable solution to mitigating the climate crisis.

THE FUTURE OF SEQUESTRATION. Despite the criticism and cost, carbon capture and storage is not going away.

What Is Carbon Capture And Storage?

CCS involves the capture of carbon dioxide emissions from industrial processes, such as steel and cement production, or from the burning of fossil fuels in power generation.

This carbon is then transported from where it was produced, via ship or in a pipeline, and stored deep underground in geological formations.

The CO2 is then compressed and transported via pipelines, road transport or ships to a site for storage.

Where are carbon emissions stored in CCS? Possible storage sites for carbon emissions include saline aquifers or depleted oil and gas reservoirs.

A storage site for the proposed Zero Carbon Humber.

Endurance is approximately 1.6km below the seabed and has the potential to store very large amounts of CO2.What is Carbon Capture, Utilisation and Storage? What is the difference between CCUS and CCS? As well as CCS, there is a related concept, CCUS, which stands for Carbon Capture Utilisation and Storage.

The idea is that, instead of storing carbon, it could be re-used in industrial processes by converting it into, for example, plastics, concrete or biofuel.

IPCC: Politics, Not Tech Or Money, Blocking Climate Action

Even government pledges on reducing emissions, made in the run up to last year’s U.N. climate summit and have yet to be fully enacted, would overshoot the 1.5°C target, the IPCC said.

The IPCC report lays out in stark terms how central cutting fossil fuel use must be to protecting the climate.

A failure to implement policies that discourage investment in fossil fuels, and a fear of increasing energy prices in the short term, means that both governments and private investors are still funneling more money towards fossil fuels than towards renewables and other solutions to climate change.

“Governments are well aware that [renewables] are often the cheapest form of energy, but they’re stuck in the political inertia behind the fossil fuel economy,” says Tom Evans, a researcher on geopolitics, climate diplomacy, and security at European climate think tank E3G. “Trying to stop that train crash is why you see millions of people taking to the streets and protesting about climate change.”

“The IPCC’s conclusions should offer a really clear way forward that climate action is the solution to rising energy bills and reliance on Russian oil and gas,” Evans says.

“There is no silver bullet for solving climate change, but there is a smoking gun: fossil fuels,” says Nikki Reisch, director of the climate and energy program at the Center for International Environmental Law.

“You can feel the scientists’ frustration that mountains of evidence isn’t yet driving the radical action needed to meet global climate goals. They are watching the clock tick down as governments and polluters continue to avoid making the bold changes in our energy, food and industrial systems, that are our only route out of catastrophic climate change.”

Global Carbon Capture And Storage Market Reach A Value Of US$ 4.09 By 2027

IMARC Group’s latest research report, titled “Carbon Capture and Storage Market: Global Industry Trends, Share, Size, Growth, Opportunity, and Forecast 2022-2027,” offers a detailed analysis of the market drivers, segmentation, growth opportunities, trends, and competitive landscape to understand the current and future market scenarios.

The global carbon capture and storage market reached a value of US$ 2.25 Billion in 2021.

Looking forward, IMARC Group expects the market to reach a value of US$ 4.09 Billion by 2027, exhibiting a CAGR of 10.20% during 2022-2027.

The growing manufacturing sector is primarily driving the carbon capture and storage market.

The expanding R&D activities to engineer bioenergy carbon capture and storage are also positively influencing the global market.

Apart from this, numerous other factors, including the increasing investments in upstream and downstream sectors and the introduction of sustainable CSS technology for improved oil recovery, are anticipated to fuel the carbon capture and storage market over the forecasted period.

IMARC Group is a leading market research company that offers management strategy and market research worldwide.

Capstone Copper

The SX-EW plant has a production capacity of 60 thousand tonnes per annum of high-purity copper cathodes, with current production in the range of approximately 40 to 50 thousand tonnes per annum.

The project’s $784 million projected capital expenditure costs are fully financed and completion is expected to enable us to process 236 million tonnes of copper sulfide reserves with a current 21-year expected mine life, in addition to our existing oxide mining process.

Upon completion of the MV Development Project, we expect to increase the production at Mantoverde to approximately 122 thousand tonnes of copper in 2024 at an AISC of US$1.64 per payable pound; AISC will benefit from approximately 31 thousand ounces of gold per year in by-product over the life of the mine, beginning in the first year following completion of the project.

The capital cost of the project is estimated to be US$783 million and represents a capital intensity of approximately US$12,500 per tonne, which is substantially lower than the Latin American industry average of approximately US$20,000 per tonne as calculated by Wood Mackenzie.

As part of the financing of MVDP, Mitsubishi Materials acquired a 30% interest in Mantoverde for US$275 million, subject to an additional contingent payment of US$20 million upon the satisfaction of technical requirements related to the increase in project ore reserves containing 500,000 tonnes of contained copper.

The MV Phase II Expansion is an opportunity to add a second ball mill to potentially provide incremental production of approximately 30 thousand tonnes of copper per year by 2026, which would increase production at Mantoverde to over 136 thousand tonnes of copper per year.

As an alternative to the MV Phase II Expansion, the MV Second Line Expansion is an opportunity to add a second 32-thousand-tonne-per-day concentrator to provide incremental production of approximately 50 thousand tonnes of copper per year, which we expect would increase production at Mantoverde to over 186 thousand tonnes of copper per year.

Mantoverde Sulphide Development Project, Atacama, Chile

The Mantoverde Sulphide Development Project is a brownfield copper project in the Atacama region of Chile.

Mantoverde Sulphide Development Project location and geology.

The Mantoverde Sulphide Development Project is approximately 56km south-east of Chanaral and approximately 40km east of Bahía de Flamenco.

The mineral reserves at the Mantoverde Sulphide Development Project are estimated to be 2.1 million tonnes of contained copper, while resources are estimated to be 5.7Mt of contained copper.

The Mantoverde Sulphide Development Project is estimated to produce approximately 74,000t of copper concentrate a year.

The project will expand the processing operations at Celso-Mantoruso and Mantoverde through the construction of a concentrator plant with a capacity of 13 million tonnes per annum with a daily average of 33,000t and a maximum of 35,600t, during the useful life of the project.

An $847m project financing package for the Mantoverde Sulphide Development Project was closed in February 2021.

Mantoverde Development Project

With proven experience delivering cost-effective projects under lumpsum EPC contracts, Ausenco was selected to lead the engineering, procurement, construction, and production ramp-up to nameplate for a copper concentrator plant and related infrastructure – including the expansion of the desalination plant and the tailings dam – at the Mantoverde Development Project in Chile.

This world-class project in the Atacama region represents a strategic development in the global copper market.

Drawing on our global expertise we assembled the strongest and most efficient team to support the 36-month project during its development.

The project will be led from our Chile office of more than 650 employees with the support of our technical experts located in Australia and Canada.

Redefining what’s possible, we look forward to safely delivering an exceptional project to Mantos Copper and all of its stakeholders.

Upon completion in 2024, Mantoverde will produce 110,000 t/y of copper and 33,000 oz/y of gold during the first 7 years of the project’s 20 year life.

Currently 160 Ausenco team members are on the project – 120 in our Santiago office and 40 on-site.

Capstone Mining, Mantos Copper To Merge

Based in Vancouver, British Columbia, Capstone Copper will have operations in the US, Mexico and Chile.

The plan is to boost the combined company’s production by 45% by 2024 to 260,000 tonnes of copper per year from fully-financed projects with Mantos Blancos currently ramping up and construction underway at Mantoverde, in which Mitsubishi Materials owns a 30% stake.

Under the terms of the deal, each current Capstone Mining shareholder will receive one share of the new company per share owned of Capstone Mining.

Current Capstone owners will own 61% of the new company, while Mantos shareholders will own 39%. Mantos executive chairman, John MacKenzie, will lead the combined company as its chief executive, while Capstone boss Darren Pylot will take the role of executive chairman.

Mantos Copper acquired Mantoverde and Mantos Blancos copper mines from Anglo American in 2015.

The Mantoverde open pit mine, in the arid Atacama Desert, holds an estimated 2.1 million tonnes of copper reserves.

Chile is the world’s largest copper producer, meeting more than 30% of global demand.

Mantos Secures $847m Funding For Mantoverde Development Project

Mantos Copper has secured a financing package of $847m to fully fund the development of the Mantoverde sulphide project in northern Chile.

The development debt is made up of a 12-year senior secured amortising project debt facility of $520m, and a 10-year senior secured closure bonding facility of $51.6m. For the senior secured amortising project debt facility, Mantos Copper has signed definitive documentation with Banco de Crédito e Inversiones, Export Finance Australia, BNP Paribas, MUFG Bank, ING Capital, Natixis, and Societe Generale.

Last year, around this time, Mantos Copper signed a deal worth $275m with Japan-based Mitsubishi Materials to divest a 30% stake in the Mantoverde sulphide project.

The Japanese firm expects to be entitled to nearly 42% of the total copper concentrate produced from the Mantoverde sulphide project.

“Mantos Copper executive chairman John MacKenzie said:”The project will expand Mantoverde into a world class copper mine, and bring material benefit to all of its stakeholders, including employees, contractors, suppliers, customers and local communities.

“Together with our fully financed Mantos Blancos Concentrator Debottlenecking Project, the construction of which is now 70% complete and which will extend Mantos Blancos’ life to 2035 by increasing and streamlining production from its sulphide deposit that features an average grade of 0.85% in the next ten years, Mantos Copper is well advanced in realising our strategy in becoming a world class sustainable copper business with total copper production approaching 200 kt per annum.”

The brownfield copper project calls for the construction of a copper concentrator, a tailings dam, and other related facilities to process ore from the Mantoverde sulphide deposit.

Freeport-McMoRan Stock Rating Upgraded By StockNews.Com

According to data from MarketBeat.com, the stock presently has an average rating of “Hold” and a consensus price target of $42.67.

In other news, CFO Kathleen L. Quirk sold 40,500 shares of the company’s stock in a transaction dated Friday, February 4th. The stock was sold at an average price of $38.55, for a total transaction of $1,561,275.

CFO Kathleen L. Quirk sold 80,000 shares of the company’s stock in a transaction dated Wednesday, February 16th. The stock was sold at an average price of $44.02, for a total value of $3,521,600.

Morgan Stanley now owns 15,548,768 shares of the natural resource company’s stock worth $577,014,000 after acquiring an additional 2,859,755 shares in the last quarter.

North Star Investment Management Corp. now owns 7,213 shares of the natural resource company’s stock valued at $235,000 after purchasing an additional 545 shares during the period.

Venture Visionary Partners LLC now owns 24,827 shares of the natural resource company’s stock valued at $807,000 after purchasing an additional 6,399 shares during the period.

Kestra Private Wealth Services LLC now owns 26,628 shares of the natural resource company’s stock valued at $866,000 after purchasing an additional 1,694 shares during the period.

This Is What Whales Are Betting On Freeport-McMoRan

Looking at options history for Freeport-McMoRan FCX we detected 15 strange trades.

If we consider the specifics of each trade, it is accurate to state that 33% of the investors opened trades with bullish expectations and 66% with bearish.

Taking into account the Volume and Open Interest on these contracts, it appears that whales have been targeting a price range from $43.0 to $65.0 for Freeport-McMoRan over the last 3 months.

In terms of liquidity and interest, the mean open interest for Freeport-McMoRan options trades today is 3729.17 with a total volume of 4,062.00.

In the following chart, we are able to follow the development of volume and open interest of call and put options for Freeport-McMoRan’s big money trades within a strike price range of $43.0 to $65.0 over the last 30 days.

What The Experts Say On Freeport-McMoRan:Deutsche Bank has decided to maintain their Hold rating on Freeport-McMoRan, which currently sits at a price target of $42. Jefferies has decided to maintain their Buy rating on Freeport-McMoRan, which currently sits at a price target of $58. Options are a riskier asset compared to just trading the stock, but they have higher profit potential.

Serious options traders manage this risk by educating themselves daily, scaling in and out of trades, following more than one indicator, and following the markets closely.

Freeport-McMoRan, Inc. engages in the mining of copper, gold, and molybdenum.

The North America Copper Mines segment operates open-pit copper mines in Morenci, Bagdad, Safford, Sierrita and Miami in Arizona; and Chino and Tyrone in New Mexico.

The Indonesia Mining segment handles the operations of Grasberg minerals district that produces copper concentrate that contains significant quantities of gold and silver.

The Molybdenum Mines segment includes the Henderson underground mine and Climax open-pit mine, both in Colorado.

The Rod and Refining segment consists of copper conversion facilities located in North America, and includes a refinery, rod mills, and a specialty copper products facility.

The Atlantic Copper Smelting and Refining segment smelts and refines copper concentrate and markets refined copper and precious metals in slimes.

The Corporate, Other, and Eliminations segment consists of other mining and eliminations, oil and gas operations, and other corporate and elimination items.

Freeport-McMoRan

The current company was created in 1981 through the merger of Freeport Minerals, formerly Texas Freeport Sulphur Company and McMoRan Oil & Gas Company, becoming Freeport-McMoRan Inc. [edit].

The company became known as Freeport Sulphur, later changing its corporate name to Freeport Minerals.

Enterprise to support Freeport Sulphur’s business and the new town’s infrastructure led to the incorporation of a holding company on September 30, 1913, to join the newer assets with Freeport Sulphur.

In 1932, Freeport Sulphur Company acquired the sulfur rights for Lake Grande Ecaille and vicinity in Plaquemines Parish, Louisiana, and escalated the development of sulfur deposits in the Grand Ecaille dome in 1933, still using the Frasch Process developed by Dr. Herman Frasch, who had, in 1895, enjoined the American Sulphur Company into a partnership, forming the Union Sulphur Company, to initiate the first successful sulfur mining at Grand Ecaille, with which Freeport, like other competitors, would compete upon expiry of the Frasch patents in 1908.

In 1961, the company entered the kaolin business after purchasing the assets of Southern Clays Inc. In 1964, the company formed Freeport of Australia to pursue mining opportunities there and in the surrounding Pacific Ocean region.

In 1969, McMoRan Exploration Company was founded, which, in 1981, would merge with Freeport Minerals, formerly Freeport Sulphur, to form Freeport-McMoRan.

In 2012, the company announced agreements to acquire affiliated companies McMoRan Exploration Company and Plains Exploration & Production Company for a total enterprise value of over $20 billion.

Freeport-McMoRan Inc. Stock Quote

Freeport-McMoRan, Inc. engages in the mining of copper, gold, and molybdenum.

The North America Copper Mines segment operates open-pit copper mines in Morenci, Baghdad, Safford, Sierrita, and Miami in Arizona and Chino and Tyrone in New Mexico.

The Indonesia Mining segment handles the operations of Grasberg minerals district that produce copper concentrate containing significant quantities of gold and silver.

The Molybdenum Mines segment includes the Henderson underground mine and Climax open pit mine, both in Colorado.

The Rod and Refining segment consists of copper conversion facilities located in North America and includes a refinery, rod mills, and a specialty copper products facility.

The Atlantic Copper Smelting and Refining segment smelts and refines copper concentrate and markets refined copper and precious metals in slimes.

The Corporate, Other and Eliminations segment consists of other mining and eliminations, oil and gas operations and other corporate and elimination items.

Thanks to our generous employees, Freeport-McMoRan last year raised more than $10 million through the annual campaign to help make a positive difference in the lives of others.

The advent of electric power shovels such as this one at our #MorenciAZ mine have allowed #miningoperations to process more material quicker and are much more energy efficient.

Learn more in last month’s episode of CoreSafety TV: youtu.

Be/OERgTvbXFiIToday is National Miners Day, and we honor miners past and present for their contributions and sacrifices that have made our lives better.

What’s next for major mining orgs as we seek a more sustainable future? bit.

These old steam trains moved #copper ore from underground mines at our #Morenci operations.

Modern diesel locomotives have helped transform Morenci into one of the largest open-pit mines in North America.

Copper Tubing

This tubing has good corrosion resistance and excellent heat transfer qualities.

All tubing meets international standards for copper tubing.

This Type M tubing has the thinnest walls of all our copper tubing for drinking water.

Tubing has good corrosion resistance and excellent heat transfer qualities.

This Type L tubing has thicker walls than Type M tubing to handle higher pressures.

This Type K tubing has the thickest walls of all our copper tubing for drinking water to handle the highest pressures.

Of this tubing is lined with 99% pure tin for added corrosion resistance.

Copper Tubing Sizes & Dimensions Chart

Warning: All pipe plugs must be blocked or anchored adequately against a force equal to the head pressure times the cross-sectional area of the pipe.

Debris or protrusions in the pipeline can damage a seal or rupture inflatable plugs.

NEVER use an inflatable plug when its failure could cause injury or catastrophic damage or as the only means of protection for personnel working downstream.

NEVER use a test pressure greater than the capacity of the weakest pipe or component in the system.

Actual conditions vary so user must accept full risk and responsibility for the selection and use of any product.

Note 1: Mechanical and Molded Rubber Plugs are generally used for testing because fabricated Multi-Flex® style plugs may allow some seepage unless customized for a positive seal.

Images are typically representative and may not be an exact representation especially of the item size.

Mueller Streamline Co.

Streamline sets the standard for quality and cleanliness in the HVACR and plumbing industries.

With a full line of both copper and plastic-coated copper tube for plumbing, air-conditioning, refrigeration, medical gas and other applications, our copper tube products are the preferred brand of industry professionals.

Copper Tubing

Copper tubing is slowly being replaced by PEX tubing in hot and cold water applications.

There are two basic types of copper tubing, soft copper and rigid copper.

Soft copper tubing can be bent easily to travel around obstacles in the path of the tubing.

While the work hardening of the drawing process used to size the tubing makes the copper hard or rigid, it is carefully annealed to make it soft again; it is more expensive to produce than non-annealed, rigid copper tubing.

Common wall-thicknesses of copper tubing in the U.S., Canada and India are “Type K”, “Type L”, “Type M”, and “Type DWV”:. Type K has the thickest wall section of the three types of pressure rated tubing and is commonly used for deep underground burial, such as under sidewalks and streets, with a suitable corrosion protection coating or continuous polyethylene sleeve as required by the plumbing code.

In Australia, copper tubing classifications are “Type A”, “Type B”, “Type C”, and “Type D”:. Copper pipes in Australia are referenced to their DN number, which is a nominal millimeter equivalent to their actual Imperial size.

Pitting occurs because the electrical voltage ionizes the pipe’s interior copper metal, which reacts chemically with dissolved minerals in the water, creating copper salts; these copper salts are soluble in water and wash away.